• Custom Built Multi Rotors
• Multi Rotor Kits
• Multi Rotor Flight Controllers
• Multi Rotor Frames
• Multi Rotor Landing Gear
• Multi Rotor Camera Mounts / Servos
• FPV/OSD/Video Downlink
• Multi Rotor Motors
• Multi Rotor Esc's
• Multi Rotor Props
• GPS / WayPoints etc...
• Batteries
• Battery Chargers
• Build Fees/Labor Charges
• Multi Rotor Spare Parts
• Hardware, Acc., Misc.
• Used/Open Box Etc.
• Flight Simulator/Training
• Multi Rotor Orientation LED's
• Manuals/Assembly Guides
• Rc-Drones  Channel
• Rc-Drones Custom Builds Pics
|
|
DJI NAZA
Frame
DJI F450 ARF Quad Frame
Motors
Stator size: 22x12mm
KV: 920 rpm/V
ESC's
Current: 30A OPTO
Signal Frequency: 30Hz ~ 450Hz
Battery: 3S ~ 4S LiPo
Propellers
Adopt PC/ABS ultrastrength material design,fine surface hardness ,anti-impact
Dimensions: 8 x 4.5 in
Dimensions: 10 x 4.5 in
|
| |
|
|
Huge assemble space
Optimized frame design, provides abundant assemble space for autopilot systems
Gorgeous Frame Arms Provide different color frame arms: red, white, black, which makes your flight more colorful
|
|
FlameWheel series is multi-rotor frame designed for all pilots for fun or AP. With DJI WKM or NAZA autopilot system, it can achieve hovering, cruising, even rolling and other flight elements. It can be applied for entertainment, aerial photography, FPV and other aeromodelling activities.
| SPECIFICATIONS OF ARF NAZA: |
| Model |
Frame Weight |
Diagonal Wheelbase |
Takeoff Weight |
| Flame Wheel (F450) |
282g |
450mm |
800g ~ 1600g |
| |
|
|
|
| Recommended Propeller |
Recommended Battery |
Recommended Motor |
Recommended ESC |
| 10×3.8in ; 8×4.5in |
3S~4S LiPo |
22×15mm or 22×12mm |
30A OPTO |
|
| NAZA Details: |
-
All-in-One design. All-in-One Design integrates inner damping, controller, gyroscope, accelerometer and barometer, which simplifies installation and saves space.
-
Advanced attitude stabilization algorithm. Advanced mix guidance algorithm and control algorithm, inherits outstanding flight stability of DJI products, provides excellent maneuverability, gives hobbyists wonderful flight experience.
-
Low voltage protection. Two-level low voltage protection. low voltage LED alarm, and automatic landing.
-
D-BUS. D-Bus supports S-BUS receiver system
-
2-axis Gimbal Stabilization. The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the helicopter after setting the parameters the first time.
-
Upgradeable and extendible Easy firmware upgrade, extendible port for future use is available.
NAZA SPECIFICATIONS:
| General |
| Built-In Functions |
Autopilot |
|
Auto Level Fail-safe |
|
Low Voltage Protection |
|
S-Bus Receiver Support |
|
2-axle Gimbal Support |
| Peripheral |
|
| Supported Multi-rotor |
Quad-rotor I, X; |
|
Hex-rotor I, V. |
| Supported ESC output |
400Hz refresh frequency. |
| Recommended Transmitter |
PCM or 2.4GHz with minimum 4 channels. |
| Assistant Software System Requirement |
Windows XP SP3Windows 7 |
| Electrical &Mechanical |
|
| Working Voltage Range |
MC:4.8V~5.5V |
| |
VU: 7.2V ~ 26.0 V (recommend 2S ~ 6S LiPo) |
| Power Consumption |
MAX1. 5W (0.3A@5V) |
|
Normal:0.6W (0.12A@5V) |
| Operating Temperature |
-10C ~50C |
| Weight |
MC:25g |
| |
VU:20g |
| Dimensions |
MC: 45.5mm x 31.5mm x 18.5mm
|
|
VU: 32.2mm x 21.1mm x 7.7mm |
Flight Performance
(can be effected by mechanical performance and payloads) |
| Max Yaw Angular Velocity |
190 degrees/ s |
| Max Tilt Angle |
45 degrees |
| Ascent / Descent |
+6m/s |
|
**PLEASE READ**
When flying, the fast rotating propellers of FlameWheel will cause serious damage and injury. Therefore, please fly with a high safety consciousness.
Keep flying multi-rotor away from objects, such as obstacles, human beings, high-voltage lines and so on.
Do not get close to or even touch the working motors and propellers, which will cause serious injury.
Do not over load the multi-rotor.
Check whether the propellers and the motors are installed correctly and firmly before flight.
Make sure the rotation direction of each propeller is correct.
Check whether all parts of multi-rotor are in good condition before flight. Do not fly with old or broken parts.
Use DJI parts as much as possible.
If you have any problem you cannot solve during installation, please contact our customer service. |
|
