A single frame piece of Carbon Fiber 3K twill 2.5mm thick
pure carbon fiber frame which, at this scale, offers a near invincible
backbone from which to build.
Includes:
NAZE 32 ACRO 6DF REV 5 Flight Controller Board with Pins and Breakout Cable
**1 Included**
PLEASE NOTE: Includes Straight and Angled Pins and breakout cable as pictured. Can be configured with BaseFlight or CleanFlight software.Designed for use with small indoor or small to mid-sized outdoor multirotor crafts, or as a standalone camera stabilizer. The Naze32 flight controller is extremely simple to setup, with configuration based on the familiar “MultiWii” software.Features:Battery voltage monitoringBuilt-in FrSky telemetry converterModern 32-bit processor (STM32 F103) running at 3.3V/72MHz.Onboard USB for setup and configurationExtra bright LEDsModern GUI for all operating systems, Base flight ConfigurationSpecifications:Height: 3.6cmWidth: 3.6cmWeight: 6g (no headers, 8 grams with)Sensors: MPU6050Headers: Includes 1x 3x6 90 degree pin headers, 1x 1x2 straight pin headers, 1x 2x3 90 degree pin headers, and 1x 2x5 straight pin headers.Package Includes:Naze32 6DF Flight ControllerAngled PinsStraight PinsBreakout Cable
RotorX RX1105 Brushless Micro Motor
**6 Included**
The tiny RX1105 "Gatling" motors are quite simply in a class of their own in regards to performance, size and durability. Now on to their 5th generation, these super efficient powerhouses are capable of generating 110grams of thrust at 2.9A on a 3S powertrain. Weighing in at only a fraction over 5 grams total including motor wires, these motors also come with an optional T-style propeller mounting system that is designed to work with our upcoming RX3020 props to make 4S power feasible, but also with any other propeller that utilizes a 1.5mm shaft. Our frame mounting configuration will be made available to purchasers, meaning you can design your own frames to take advantage of these little beasts. Perhaps most importantly, these micro motors are designed to survive even the hardest of crashes, allowing you to stay in the air longer and have less replacement costs.
Specifications:
- Lipo Range: 1~3S (3.7~11.7V) with 4S operation in testing stage
- Suggested prop: RX3020
- Max current: TBA
- Burst current (10sec): TBA
- Weight: 5.1g (including mount and wire)
- Shaft: 1.5mm
- Shaft length: 4mm
- Dimensions : 13 x 10mm
Test Data:
- 3020 prop (2g outrunner)
- Voltage: 12.3V
- Current: 2.9A
- Thrust: 110g
Props that were designed and made for these motors:
RotorX RX3020 T-Motor Style 3" White Propeller
**1 Package Included**
**In Stock Now Shipping**
Motors that were designed and made for these Props:
RotorX RX3020 T-Motor Style 3" Black Propellers
**1 Package Included**
Set of 6 RX3020 custom made propellers with a T-style mounting system for attaching to RX1104 motors only. Requires 2x M2 6mm screws for mounting per motor.
Motors that were designed and made for these Props:
FVT Little Bee Opto OneShot125 BLHeli 20a ESC
**Comes with 6 ESCs**
Latest Blheli firmware 14 (14.0.0.3) Download link
Silabs Chip
Oneshot / Active Braking (dampened light mode)
Signal wire programmable with an Arduino board Link as these have the blheli bootloader the afro toolstick and rctimer linker will not work
Input: 2-4s Lipo
Constant: 20 Amps
Burst: 30 Amps
Weight: 4g bare board
Dimensions: 23x12.5x3mm
Motor wire: 70mm
Signal wire: 120mm
PCB - 4 Layer Blind Pole PCB - 3oz Pour
Mosfet: N-Channel
BEC: None "Opto"
With all Esc's that have active braking we recomend you isolate or filter all sensitive electronics to prevent feedback / spikes
The LSPDB is a great choice as it also has 12v & 5v outputs and are isolated with an Lc Filter
Click below to view the Matching RotorX Raiju (RX155) Carbon Fiber Canopy
