Phoenix Flight Gear
XtremeMount
Camera/Accessory Mount
for the RC EyeONE Xtreme
**GoPro Camera NOT INCLUDED**
**GoPro Camera NOT INCLUDED**
**Mobius Camera NOT INCLUDED**
**Mobius Camera NOT INCLUDED**
Replace the stock
battery tray on your RC EYE One Xtreme and film your flights. This tray
cut from 1mm oriented strand carbon fiber and weighs in at 8 grams with
hardware. The upgrade to your Xtreme will allow you to mount small form
factor cameras such as the GoPro Hero 3 or the Mobius to your Xtreme. If
you are mounting a camera we recommend that you install the Xtreme
Aerial Kit to incase your ground clearance.
The included
adhesive foam strips and velcro strap will allow you to mount multiple
camera types and allows you to adjust the battery forward to rear so
your quad is properly balanced for best flight.
Also available is the Phoenix Flight Gear
Xtreme CarbonSpyder FPV Micro Frame. A 2mm 3k twill weave solid carbon
fiber frame kit will upgrade the stock frame or replace a broken frame.
The frame relocates the arms to a spyder style frame to get props out of
camera view.
Included:
Carbon fiber battery accessory tray
1 - Thin Foam Strip
1 - Thick Foam strip
4 - M2x20 screws
4 - M2 locknuts
4 - M2 washers
4 - O-rings
1 - Velcro strap
Specs:
Weight with hardware: 7.8g
Approximate size: 110x35, front camera tab 55mm wide
Stock battery tray weight: 3.5g
**Note**
If you are mounting a GoPro to your Xtreme, you
will need additional ground clearance. Until the RcLogger Xtreme
Landing Legs (79mm) are available we recommend that you install a
standoff onto the bottom of each leg with a screw. This leg extension
kit can be purchased here and includes 4 30mm aluminum standoffs and 4
M3x6 aluminum screws. Install simply by drilling a 1/8" hole in the
bottom of each leg and installing the standoff and screw.
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"
