Phoenix Flight Gear Xtreme CarbonSpyder Foldable FPV Micro Frame

**Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Accessory Plate, Alum screws and Standoffs are OPTIONAL (See below)** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Accessory Plate, Alum screws and Standoffs are OPTIONAL (See below)** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Accessory Plate, Alum screws and Standoffs are OPTIONAL (See below)** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Accessory Plate, Alum screws and Standoffs are OPTIONAL (See below)** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Accessory Plate, Alum screws and Standoffs are OPTIONAL (See below)** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Accessory Plate, Alum screws and Standoffs are OPTIONAL (See below)** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Accessory Plate, Alum screws and Standoffs are OPTIONAL (See below)** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Accessory Plate, Alum screws and Standoffs are OPTIONAL (See below)** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Accessory Plate, Alum screws and Standoffs are OPTIONAL (See below)** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Accessory Plate, Alum screws and Standoffs are OPTIONAL (See below)** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components** **Frame Kit includes everything shown, except FPV camera and RC Logger Xtreme components**

Take this foldable micro quad anywhere you want to fly! It's compact size and versatility makes it a great back yard flyer or, mount a camera (both the Mobius action cam and GoPro mount to the stock frame) for some great arial footage. Based on the RcLogger Extreme eyeONE flight controller building this micro quad is not overly complicated and is build able for most anyone with basic hobby skills. Once built the stock RcLogger Extreme canopy or the optional Extreme accessory plate can be installed to protect and conceal the electronics.

Folding all four arms back gives the frame a footprint of 10x30x7cm allowing it to store away almost anywhere and makes it one of the most transportable frames we have to offer. The quad and a transmitter along with the accessories and spares you will want to take with will all fit into one of our small travel hard cases (sold separately)

There are two versions of this frame, the first, reuses the electronics and landing gear off of the stock RcLogger Extreme eyeONE. Version two, hopped up, has different arms for the Phoenix Flight Gear Edition MT1306 T-Motors and pair with the T-Motor Carbon Fiber Props 6x2.

If you really dig the FPV scene, we have made this frame just for you, with a mobius camera up front, out of the prop view, you can strap a video TX to the back and maintain your CG. Once built up you can then pack it up in your briefcase to take to work, take it to the job site in your glove box for lunch time diversions and if you get roped into a trip to the mall, spend some time in the parking lot logging flight time. There are many strap slots and tabs that can be utilized to securely mount any micro frame accessories you can carry and allow you to position them in many places.

If longer flights or heavy FPV power draw is shortening your flight times, purchase the RcLogger 1150mah 2S 20C battery and get more time in the air and more punch out of your quad.

This frame, both standard and hop up versions, will allow you to:
Mount the stock battery centered under the frame and fly as is.
Mount a Mobius Action Cam on the front, micro downlink and battery in the rear position to maintain CG.
Mount a Gopro up front, micro downlink and battery in the rear position to maintain CG.
Mount a CMOS/CCD board camera up front, micro downlink and battery out back.

Purchase the optional accessory plate and:
Mount a CMOS/CCD board or action cam up front, video transmitter up top and, battery out back.
Mount your FPV TX antenna remotely with a SMA extension.
Mount your electronics in locations that will preserve the CG.

Our favorite build uses the, PFG edition 1306 T-Motors, T-Motor 6x2 Carbon props, RcLogger 1150mah battery and a Mobius Action Camera.

The conversion requires intermediate hobby skill. Instruction WILL be included with your frame.

**NOTE: Your T-Motor Tiger Motors WILL NEED to have extension wires soldered to the ends of each wire due to length of the stock wiring.**

**Important we supply STRONG fishing wire to loom around the arms in order to keep the motor extension wiring as tight as possible to the arm to keep it neat and not catch on anything.**

Weight as shown WITHOUT FPV Camera: 170g

Included:
Phoenix Flight Gear Extreme CarbonSpyder Foldable FPV Micro Frame
FPV CMOS/CCD camera plate
FPV cam locking plate
4 - Arms (stock motor)
2 - 30mm standoffs
4 - M3x10 screws
8 - M2x6 screws
4 - M2x12 screws
8 - M2x10 screws
4 - M2x3 nylon spacers
16 - M2 washers
20 - M2 locknuts
2 - Lightweight Velcro straps
Motor wire
Shrink tube
Fish line
O-ring canopy strap
Instructions

Required:
1.3mm allen wrench
2.0mm allen wrench
4.5mm nut driver
#1 philips screwdriver
Soldering Iron
Solder
Low strength thread locker

Below are the link arrows to complete your install:

Flight Control link below:

Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"