Phoenix Flight Gear Xtreme CarbonSpyder
FPV Micro Frame (Tiger Edition)
**PFG Xtreme CarbonSpyder FPV Micro Tiger Edition Frame**
Turn the up the fun on your EYEOne Xtreme with this FPV Micro Tiger Edition frame conversion. Love the cool clean look of solid 2.0mm 3k twill weave carbon fiber cut here in the Phoenix Flight Gear facility. We at PFG created this frame to improve the FPV and camera views by reformatting the frames arm span slightly to turn the Xtreme Quad into an EYEOne XtremeFPV Micro Tiger Edition frame.
Frame weight is greatly reduced from the stock frame, 25g. Our carbon fiber frame, only 17.5g.
We have moved the arms out to a spyder configuration to improve the prop in view problem found with the stock frame.
The conversion requires intermediate hobby skill. Simply disassemble your Xtreme and rebuild onto the carbon fiber frame. Instruction WILL be included with your frame.
**NOTE: Your T-Motor Tiger Motors WILL NEED to have extension wires soldered to the ends of each wire due to length of the stock wiring.**Included:PFG Xtreme CarbonSpyder FPV Micro Frame
8 - M2x6 screws
12 - M2 Locknuts
8 - M2x12 screws
4 - M2 spacers
4 - M2 washers
4 - 1/4" standoffs (optional, install with PFG XtremeMount Camera / Accessory Mount)
Velcro Strap
Thick Foam
Thin Foam
Instructions
Required:1.5mm allen wrench
#1 phillips head wrench
4mm nut driver
Drill
5/32" drill bit.
Solder/Solder Gun
Below are the link arrows to complete your install:
Flight Control link below:
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"
