Phoenix Flight Gear Xtreme CarbonQuad Sport Micro Frame Stock/Tiger Edition
The ultimate upgrade for your RCL Xtreme, Stock or T-motor compatible
**This is the updated multi motor mounting version**
Description: Convert your mini quad into a great, upgradable sport flyer. This
frame has been re-designed to allow you to upgrade your quad with a new
frame. Cut from 3k twill weave carbon fiber with a high gloss finish,
not G10/FR4 or other fiberglass fill materials. This frame is more
durable, lighter and upgradable to high performance T-Motor 1306-11
motors and T-motor 6x2 carbon propellers. Frame weight with hardware is
only 25g.
We have updated this frame, combining
the stock motor version and T-motor version. The new motor mounts will
provide more protection for the plastic stock motor mounts preventing
breakage. The frame is now upgradable in time, you can fly with the
stock motors and when your skills improve you will be able to swap out
the motors and really rip up the sky. *Note, when upgrading motors all
four must be all upgraded at the same time.
The
stock motor conversion takes about an hour to complete, basic hobby
skill and no soldering. Simply disassemble your RCL Xtreme frame and
rebuild onto the CarbonQuad frame. If you want to drastically improve
your flight performance then T-motors will give it to you. That
conversion will require intermediate hobby skill, basic soldering and
about two hours to complete and worth every bit of effort.
**NOTE:
Your T-Motor Tiger Motors WILL NEED to have extension wires soldered to
the ends of each wire due to length of the stock wiring.**
Included:
Xtreme CarbonQuad Sport Micro Frame
8 - M2x6 screws
12 - M2 locknuts
8 - M2x12 screws
4 - M2 spacers
4 - M2 washers
4 - 1/4” standoffs (optional, install with PFG XtremeMount Camera/Accessory Mount)
Velcro Strap
Thick Foam
Thin Foam
Required:
1.5mm allen wrench
#1 Phillips screwdriver
4mm nut driver
Drill
5/32” drill bit
