Description:The
Xtreme is taking over the mini/micro scene with this quad, we have
taken it to the next level for beginner and serious FPV flyers out
there. With mounting locations and accommodations for many of the
accessories FPV flight requires, camera, TX units, batteries, etc.... A
board mount camera can be mounted on the front under the frame. The
front mount board cam can be mounted level or angled slightly upward for
a better in flight view in forward motion. A shelf area off the back of
the frame allows for the mounting of accessory items, like a RX or
video TX. You can re-use the stock Xtreme landing gear for easier
orientation or, there is optional lightweight landing gear included with
this kit to provide 40mm of clearance under the frame and a stealth
look. Up front you can mount a mini cam then the FPV video TX and FPV
battery on top allowing for the RcLogger 1150mah battery in a centered
bottom location.
This frame will fold to store in tight places
and small cases. Folded this frame has a footprint of 180x100mm with the
props removed. Frame is cut from pure 3k twill weave carbon fiber with
no glass fillers or composites.The frame was designed
to accommodate the stock motors or upgrade to the T-motor 1306-20 3100v
motors.
Included:
RC Logger EyeONE Xtreme Built on CarbonQuad Foldable Stock Edition FPV
RC Logger Stock 2.4Ghz Transmitter
Micro RTF Frame
FPV CMOS/CCD camera plate
FPV cam locking plate
4 - Stock Landing Gear Legs
4 - Carbon Fiber Arms
2 - 30mm nylon standoffs
4 - 37mm standoffs
Stock LEDs
4 - Stock Motors
8 - M2x6 screws
1 - 800mah Battery
12 - M2 Locknuts
8 - M2x12 screws
4 - M2 spacers
4 - M2 washers
4 - 1/4" standoffs (optional, install with PFG XtremeMount Camera / Accessory Mount)
Velcro Strap
Thick Foam
Thin Foam
NOT INCLUDED:
Stock Arm Booms (& Hardware)
Stock Main Frame (& Hardware)
Stock Battery Tray (& Hardware)
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"