All our Phoenix Flight Gear frames are 3K twill weave carbon fiber. We DO NOT USE low quality fiberglass composite sandwiched between 2 THIN LAYERS of carbon fiber!
This frame was designed to be
highly transportable with fully collapsible arms that swing back to
fold. The frame plates are CNC cut from 1.5mm carbon fiber and are
designed to contain all of the electronics internally.
Light weight Powder Coated aluminum arms with 2mm CF vented motor plates
keep your motors secure and cool keeping your drone in the air with
heavy payloads. With the propellers removed the whole frame can fit into
a hard side case making travel to and from flight locations simple.
Keeping all of the electronics
internally mounted makes the frame build neat and clean. The frame was
designed around the electronics, inside the frame there are mounting
locations for your power distribution, ESC's and, flight controllers.
Venting holes help cool the ESC's and improves the airflow through the
interior of the frame as well. Containing all the flight electronics
internally provides a massive area on the top or bottom to mount
accessories like, gimbals, FPV, downlinks or anything else you can think
of. We have also provided two mounting locations for the DJI Zenmuse
H3-2D. One centers the gimbal on the frame and the other keeping the
lens in the center of the craft. The goal is to keep your build clean
and functional keeping ease of use a key design aspect.
The included landing gear allows
135mm clearance below the frame.If you need more than 135mm below your
Transporter to mount larger gimbals or equipment then you can equip the
frame with the optional CarbonGear 200mm Carbon Fiber Landing Gear. The
taller landing gear combined with the CarbonGear 7mm Rail Mount will
allow you to mount an AV130, rail mount brushless gimbal, rail mount
accessory / battery plate or any other accessory that has a 80mm
width, 7mm rail mount. (taller landing gear and rail mount sold separately)
Construction of the frame is
straight forward and easy to understand. There are no: glues, epoxies
or resins; no complicated specialty hardware that is hard to find and
replace, no overly complicated installation of electronics or searching
for a place to mount items. Simple CAD drawings depict the basic
construction of the air frame. CAD diagrams show the recommended
installation of the electronics. American fasteners simplify the build
using three tools, a 1/16" hex, 5/65" hex and, 5/64 nut driver. Phoenix
Flight Gear, created and manufactured by pilots for pilots.
Accommodation for electronics mounted internally:
- Standoffs for ESC mounting / spacing
- VOLTair ESC powerBoard mounting holes
- NAZA-M locators
- OpenPilot CC3D CG mounting
- Flight controllers with 30.5x30.5mm mounting
Recommended motor: 4S Phoenix Flight Gear 2814P 770kv (Coming soon)
Recommended ESC: Maytech 30a Simon K flashed
Fits up to a 15" prop
**Hard Case available** (Coming soon)
Weight: 683grams
Frame component:
- 1 - 11.75" Lightweight powder coated aluminum arm
- 2 - 10" Lightweight powder coated aluminum arms
- 2 - CF Frame plates (one top, one bottom)
- 6 - CF Motor plates
- 6 - CF Arm reinforcement plates
- 6 - CF Legs
Included hardware:
- 66 - 4-40x1/4" screws
- 21 - 6-32x1 1/2" screws
- 21 - 6-32 Locknuts
- 26 - 1" Threaded standoffs
- 4 - 1/2" Threaded standoffs
- 3 - LG 1/2" Threaded Standoffs
- 3 - Rubber landing feet
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"
