Description |
Phoenix Flight Gear Polycarbonate Dragonfly
252mm Folding Mini-H FPV RTF Kit
Extremely Durable and LED Capable for Night Flight
 **Shown with optional Phoenix Flight Lights LED Kit** **Shown with optional Phoenix Flight Lights LED Kit** **Shown with optional Phoenix Flight Lights LED Kit**      Description: Comprised of highly durable and crashworthy
polycarbonate this frame has two distinct advantages over other frames,
LED mounting locations in the base of each arm and two central frame LED
locations to light this frame up. When lit with the optional LED kit
the polycarbonate frame and arms will glow brightly giving better
orientation indication day and especially at night. Build this frame and
mount your favorite motors, ESC’s and flight control on a great mini
FPV platform. We have put this frame together to accommodate the popular
options in motors, flight control and FPV gear.
Reducing the
complexity of building many mini FPV frames, we removed the redundant
frame levels, multi part cages and, complicated, multi stage assembly.
What this means is you get just what you need in a mini FPV multicopter.
The wide open design and construction allows easy access to the many
components that make up a FPV quad enabling easy in the field repairing
or reconfiguring of the build as your components change and upgrade.
Our
folding frame body is cut from 3/16” poly and the arms 3/16” for
strength. The top cage and accessory plates are cut from 1/16”
to conserve weight. The center section of the frame has multiple wire
routing holes to utilize and tie to, battery strap slots and, flight
controller mounting that will accommodate most board style flight
controllers with a 30x30 to 45x45mm mounting. Power distribution can
sometimes get in the way of a clean build so we recommend using a Mini
Power Distribution Board with Power Filter for VTX and Camera for both
your flight and the FPV system reducing weight, simplifying the build
and giving clean filtered power to your video transmission electronics.
Reducing the overall weight of the build was also accomplished through
the use of nylon hardware where possible, retaining steel hardware for
the crucial folding arm mounting.
Two accessory plates/trays are
available from Phoenix Flight Gear. Should you want more room to
secure, mount or build up your frame purchase the Phoenix Flight Gear
Polycarbonate Dragonfly Accessory Mount Kit which includes one 1/16”
thick polycarbonate plate that can be mounted in front of or behind the
FC. The Phoenix Flight Gear Polycarbonate Dragonfly Flight Control Mount
Kit can be installed over your power distribution board and can provide
a surface mount for your flight controller or cover an open board to
protect it.
Multiple motor mounting options have been thought
of, the motor hole spacing has been slotted at 12-16mm spacing. This
spacing will work with many of the mini motors out. Phoenix Flight Gear
recommends powering with the RcTiger MN1806-14 motor. Securing all of
the electronics involved with FPV has been worked into the design, the
many slots cut throughout the frame serve two purposes, first to
secure components to the frame and second to lighten the frame. Many
prototypes have been cut and revisions made to ensure that the
central frame is strong enough and light enough for FPV flight. The top
cage has four SMA antenna holes to remotely locate your video tx
antenna; two forward and two to the rear. Many strap slots and wire
routing options are cut into the top cage should you want to mount your
VTX, battery, antennas, etc…
Note: Due to the
thickness of the polycarbonate arms, Phoenix Flight Gear recommends
using the included M2x6 screws as the screws commonly included with mini
motors are too short. RC Tiger T-Motor Navigator Series MN1806 2300kv
Brushless Motors (4 Motors)
   
Specifications:
KV..............................................................................................................2300
Configu ration....................................................................................12N14P
Stator Diameter....................................................................................18mm
Stator Length..........................................................................................6mm
Shaft Diameter.......................................................................................2mm
Motor Dimensions(Dia.*Len)...............................................Φ23×18.5mm
Weight (g)...................................................................................................18g
ldle current(10)@10v(A)..........................................................................0.6A
No.of Cells(Lipo).....................................................................................2-3S
Max Continuous current(A)180S............................................................14A
Max Continuous Power(W)180S.........................................................150W
Max. efficiency current.................................................................(3-8A)>83%
internal resistance..............................................................................117mΩ
 |
|
|
 |
|
 |
|
Rc Tiger T-Motor T12A 12 amp ESC Factory Flashed w/SimonK
( 4 ESCs)
**We Had ESC's Flashed w/SimonK and 2.5mm Bullets Installed At The Factory**
**They also Have JST's Factory Installed For Our Solderless ARF kits Or 6-Way JST Harness**


Output: Continuous 12A, Burst 15A up to 10 Secs.
Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery.
BEC: Pentium-12A: 1A / 5V (Linear mode).
Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
Size: 32mm (L) * 24mm (W) * 8mm (H).
Weight: 12g.
Features:
1.Extreme low output resistance, super current endurance.
2.Multiple protection features:
Low-voltage cut-off protection / over-heat protection / throttle signal
loss protection.
3.3 start modes: Normal / Soft /
Super-Soft, compatible with fixed-wing aircrafts and helicopters.
4.Throttle range can be configured
and is fully compatible with all transmitters currently available on
market.
5.Smooth, linear and precise throttle response.
6.Our pocket-sized Program Card can
be purchased separately for extremely easily programming the ESC at the
field.
7.With a program card, you can activate
the music playing function of the ESC, and totally there are 15 songs
can be selected Dragon Circuits Sparky Flight Controller
(BLACK or BLUE COLORs Available)
 Dragon
Circuits would like to introduce the highly anticipated Sparky flight
controller. We have taken this amazing flight controller designed by
Peabody124 for Tau Labs and built it here in the USA using the same
stringent inspection and manufacturing methods used for our aerospace
and military customers. All the sensors in Sparky are genuine, no cloned
sensors here. These two factors together equal the highest quality
flight controller on the market today. Specifications:- GPS
capable for functions such as RTH (Return To Home), Position Hold and
Waypoint navigation in conjunction with a ground station.
- Mavlink
compatible for the use of telemetry radios for use with a ground
station to provide location information and waypoint navigation.
- Barometric pressure sensor on board for accurate altitude hold indoors or out
- 9 DOF accelerometer / GYRO for the absolute quickest and most accurate angle recognition and correction
- 2 serial ports
- PPM only – SBus Support and DSM2/x support with user selectable 3.3v or 5v setting.
- Camera stabilization output for 3 axis
- 10 channel outputs
- Up to 3 adc inputs for rssi
- Very compact design, perfect for small UAV’s where space is limited. Also excellent in larger machines as well.
- Weight 6.9g with right angle header pins
- 30mm x 30mm mounting pattern
- Available with 90 degree header pins and straight header pins for easy installation no matter what your frame requires.
- Choose matching colors for your equipment. Red, Black, Blue, White, Green and Yellow.
- Taulabs ground station / firmware compatible
- Vehicle compatibility options include:
- Multirotor – Quad X, Quad +, Hex, Hex x, Hex Y6, Octo, Octo V, Octo Coax X, Octo Coax + Ground
- Car/Truck, Motorcycle, Tank Helicopter
- CCPM, FP Fixed Wing
- Standard (elevator, aileron, rudder), Elevon and VTail mixing Custom – mix your own settings for almost any vehicle
Rc Tiger Motor 6x2 T-Motor
Carbon Fiber Props (4 Props)
*Props are balanced from the factory however we suggest balancing them before installation*

This RTF Kit includes: 4 - RC Tiger T-Motor Navigator Series MN1806 2300kv Brushless Motors 4 - Rc Tiger T-Motor T12A 12 amp ESC's Factory Flashed w/SimonK 1 - Dragon Circuits Sparky Flight Controller 4 - Rc Tiger Motor 6x2 T-Motor Carbon Fiber Props 1 - 3/16" Phoenix Flight Gear Polycarbonate Dragonfly Frame 1 - 1/16" Phoenix Flight Gear Polycarbonate Dragonfly Top Cage 4 - 3/16” Phoenix Flight Gear Polycarbonate Dragonfly Arms 1 - Phoenix Flight Gear Polycarbonate Board Cam Plate 1 - Phoenix Flight Gear Polycarbonate FPV Cam Plate 1 - Phoenix Flight Gear Polycarbonate Plate Tab
Fastners/Hardware: 24 - M3x6 nylon screws 8 - M3x8 BH screws 16 - M2x6 BH screws 4 - M3x12 nylon screws 8 - M3 locknuts 4 - M3 fender washers 4 - M3x30 FF nylon standoffs 8 - M3x35 FF nylon standoffs 4 - M3x13 FF nylon standoffs 4 - M3x3 spacers   Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots" |
|
|
|
|