Quanum Pico Micro Scisky 32bit Brushed Flight
Control Board w/Motor Plugs+Battery Connector
**Comes with Motor Plugs+Battery Connector Pre-Soldered**
Same Motor plug as our MMW Chaoli Motors
Please choose Hubsan style or JST battery connector from dropdown
box and we will solder your connector before shipping
Good things do come in small packages and in this case its not just good, its great.
Setting the standard in Multi-Rotors once again, Quanum has listened
to builders of mini and micro quadcopters and released the a full
function Brushed Flight Control Board which was purpose designed and
built for quads around the 100mm and sub 100mm class.
This brushed FC has four built in ESC's
at 4.3A per FET and is ideal for brushed motors in the 6~8mm size
range. It also has a built in DSM2/DSMX compatible receiver.
The Pico is a full 32bit Cleanflight supported FC board and has a
micro USB connection. Once you have downloaded cleanflight on your PC,
you simply plug in your Pico Quanum FC Board into your PC and you have
complete control over its settings. Its that easy.
NOTE: DO NOT PLUG THE BATTERY AND USB IN AT THE SAME TIME, THE RX WILL RECIVE POWER FROM THE USB FOR SET UP. THE FETS WILL BE DAMAGED OTHERWISE.
Specs:
ESC: Brushed 4.3A x 4 (2~32KHz 4KHz stock) 6,7,8mm motors compatible
RF: DSM2/DSMX compatible
Size: 20x33x6mm
Weight: 2.5g
Software: Cleanflight or Baseflight compatible
Voltage: 1s compatable, with built in 5V DC/DC converter
Perfect for FPV micro setups.
CL-0820-15 Hyper Speed Coreless Motor 8.5x20mm
Motors come with Micro JST-1.25 plugs Installed.
This is the same connector that is on the Nano QX and AlienWii boards so motors will plug right in.
Performance data:
- operating voltage: 1.5-3.7V
- max. thrust: 40g (direct drive, Hubsan X4 propeller)
- 2.75A max. load current at 3.7V (Hubsan X4 propeller)
- factory lifetime rating: 5-6 hours
Dimensions:
- can diameter: 8.5mm
- can length: 20mm
- shaft diameter: 1mm
- shaft length: 5mm
- weight: 4.9g
All motor packs contain equal amounts of clockwise and counter
clockwise motors. To maximise performance and life span, dont run them
in reverse!
Motor rotation and correct polarity is indicated by the wire color:
clockwise: red +, blue -
counter clockwise: white +, black -
**Micro Motor Tips**
1-Drill props with #62 drill bit so they press on all the way.
2-Rest motor bottom end cap on corner of a table or something to keep it from popping off when you push the props on.
3-Add a little epoxy to the edges of the bottom end caps to keep them from popping off in a crash or when pushing props on.
4-Let motors cool a little in between battery packs.
5-Replace nicked or damaged props as damaged props will cause the motor to run hotter and will affect efficiency.
6-Make sure micro is balanced as an unbalanced micro will not fly as well and motors will run hotter and will affect efficiency.
7-Buy spares because if you crash a lot you will need them.
