For me this board was a dream come true – it allowed me to dial in
the flight characteristics of my brushed machines and make any brushed
combo fly exactly how I wanted them to…
After sharing the Original Classic AlienWii with a few friends,
others soon took interest. Initially many boards were hand built and
given away. Due to popular demand, it was later decided to offer them
for sale at Micro Motor Warehouse, and AlienWii was born. The Narrow
Classic is the latest revision of the Original Classic.
If the AlienWii Classic board does not stop flashing after 30+
flashes, it may have lost ACC calibration, and will need to be re
calibrated.
VERY IMPORTANT:
You must use MultiWiiConf GUI from the MultiWii 2.3 package or greater.
Using MultiWiiConf 2.2 or earlier WILL corrupt your EEPROM! Using
MultiWii WinGUI or any other program can also corrupt the EEPROM.
Download MultiWiiConf from the correct MultiWii 2.3 HERE
NOTE: The following process also assumes Java (a requirement for MultiWIiConf) is installed on your computer Download Java HERE. If you don’t have Jave installed, you might encounter an error:
Javaw.exe error
Launching MultiWiiConf GUI and recalibrating:
1) Disconnect the battery
2) Ensure the AlienWii Classic Brushed FC is level and remains still
3) Plug the FC via USB into your computer
4) Run MultiwiiConf (version 2.3 or higher) – Use only the 32 bit version for both 32 and 64 bit PC
5) Press Reconnect or Connect
6) Ensure that ACC Roll and Pitch are near zero
MultiwiiConf GUI
a.) If Pitch and Roll are not close to zero
1) Press CALIB_ACC and wait until Pitch and Roll are close to zero
2) Press Write
3) Press STOP
4) Press CLOSE COMM to exit.
