This micro frame is a blast to fly!
We have a great universal
micro-h frame, ultra light, weighing in at only 7 grams. Simple grommet
motor mounts hold a 8mm motor to give you the power to fly your micro
outdoors or with a small FPV system. Designed to work with many of the
popular micro quads, Hubsan X4, Blade Nano QX, Walkera Ladybird or any
other micro quad you want to try.
The
frame is cut from 1.0mm sold carbon fiber 3K twill weave with a high
gloss finish. We designed this frame to be as minimalist as possible of
the best in flight times and agility. Our choice of rubber motor mounts
was for a couple of reasons, eliminates any extra hardware, keep the
frame light and easy to build. Another great benefit of the rubber motor
mounts is that they will absorb vibration from the micro motors and
propellers.
Included in this Kit:
- Phoenix Flight Gear 110mm Carbon Fiber Micro-H Frame Ready to Fly Edition
- Transmitter Replacement for Hubsan X4 H107L and H107C (H107-19)
- Prop Steel Puller Tool
- Hubsan 380mah LiPo Battery
- USB Battery Charger
**Micro Motor Tips**
1-Drill props with #62 drill bit so they press on all the way.
2-Rest motor bottom end cap on corner of a table or something to keep it from popping off when you push the props on.
3-Add a little epoxy to the edges of the bottom end caps to keep them from popping off in a crash or when pushing props on.
4-Let motors cool a little in between battery packs.
5-Replace nicked or damaged props as damaged props will cause the motor to run hotter and will affect efficiency.
6-Make sure micro is balanced as an unbalanced micro will not fly as well and motors will run hotter and will affect efficiency.
7-Buy spares because if you crash a lot you will need them.
Optional Accessories:
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"
