Tiny Whoov FPV Micro Hovercrafts

MICRO Multi Rotors

3D Printed Products

RotorX Atom RX122 V1/V2/V3

Custom Built Multi Rotors

Multi Rotor Kits (RTF/ARF)

Multi Rotor Flight Controllers

Multi Rotor Frames

Multi Rotor Landing Gear

Camera Mounts, Gimbals & Servos

FPV/OSD/Video Downlink

Multi Rotor Motors

Multi Rotor ESC / BEC

Multi Rotor Props

GPS / WayPoints etc...

Batteries / Accessories

Multi Rotor Spare Parts

Battery Chargers / Power Supplies

DJI Phantom / INSPIRE 1 Accessories

Power Distribution Boards/Harness/Voltage Regs

Build Fees / Labor Charges

Hardware, Accessories & Misc.

Helicopter Accessories & Upgrades

Flight Simulator / Trainer

Multi Rotor Orientation LED's

Top Plate Kits

Hardware/Standoffs/Aluminum/Nylon screws

Multi Rotor Cases

Phoenix Flight Gear Parts and Accessories

Transmitters/Receivers/Modules/Telemetry & Accessories

ARF Mini Quad BUILT FREE Combo Kits

Adhesives

Tools

You Tube/Facebook Links

Assembly Instructions

Carbon Fiber Specialties
AbuseMark
Acton
Aero Sim
Aeroxcraft
AlienWii
Altitude RC
APC
Avroto
Blade
BrotherHobby
Carbon Fiber Specialties
Carboncore
CarbonGear
Chaoli
Chargery Power
Crazepony
DALprop
DJI
Dragon Circuits
Dubro
DYS
Eachine
Estes
Extreme Fliers
FatShark
FeiYuTech
FlySight
Frsky
Furious FPV
FVT
FXT Technology
GAUI
Gemfan
Genix
Go Professional
Graupner
HDMI2AV
Hitech
HQ Props
Hubsan
Hyperion
ImmersionRC
iPower
ITELITE
KingKong
Lemon Rx
Lilliput
Makerfire
Maytech
MJX
MultiFlite
Multiprotocol
Multirotor UAV
NAZE
Orion RC
Oversky
PFG Phoenix Flight Gear
PhantoMount
PhotoHigher
Pololu
Pulse
Quanum/Scisky
Racerstar
Rakon
Rc Logger
RC-Drones
RotorX
RS90
RunCam
Ryze Robotics
Secraft
Spektrum
Sputnik
Sunrise Model
Superior Hobby
Tattu
Thunder Power
T-Motor
Trinity
Turnigy
Vortex
Vulcan UAV
Walkera
Wiha
X468
X-Cam
Zippy
ZMR250
ZOP
Home > Multi Rotor Kits (RTF/ARF) > Phoenix Flight Gear
Phoenix Flight Gear CarbonSpyder 330mm FPV Quad ARF Kit
Phoenix Flight Gear CarbonSpyder 330mm FPV Quad ARF Kit

Phoenix Flight Gear CarbonSpyder 330mm FPV Quad ARF Kit

Item Id: PFG-330CSQARF
Your Price:
$595.00
Availability:
In Stock Now Shipping
Free Shipping over$50
Choose Options
Transmitter
Upgrade Motors
Upgrade Props
Quantity
Email a friend Email a friend
Description

Phoenix Flight Gear CarbonSpyder

330mm FPV Quad ARF Kit



**Pics below show (OPTIONAL Mounting Accessory, Sparky Flight Controller, Maytech ESCs, GoPro Hero 3, Zenmuse GCU) These are NOT INCLUDED with this kit**

Description:
This frame designed for FPV flight and great transportability without sacrificing performance or agility. The two frame plates that for the body of the frame are made out of solid 1.5mm carbon fiber that has a 3k twill weave and a high gloss finish. Arms are also cut from the same solid carbon fiber in 3mm to keep down frame weight and provide a easily replaced arm in case of a crash. The solid carbon fiber frame keeps the frame strong and light weight, with the high gloss finish you will be the envy of your friends at the flight field.

Use of the single piece arms makes for a much simpler build not requiring all of the additional hardware and pieces associated with motor mount plates and multi piece arms. In the even of a damaged arm, two screws hold the arm to the frame, four screws hold your motor, remove them swap the arm with a spare (sold separately) and get back in the air, not back to the workbench.

The CarbonSpyder 330mm FPV Quad has been designed and outfitted with a variety of build types. Intended to satisfy the growing hobby of multi rotor flight and arial photography, this quad is simple to build and fly for the beginner who is looking for a economical entry to multirotors. With consideration to developing your skills, you can upgrade, tune and customize the CarbonQuad to your liking. Upgrade with high efficiency motors, propellers, FPV equipment and gimbals or, the addition of flight controller accessories as you hone your skills. The frame has been designed to be easy to build with minimal hardware and a simple layout.

Balancing your drone is crucial for quality flight. The CarbonQuad 330 is easy to balance, even with all the FPV gear you need attached. Several build configurations allow you to use this quad as a sport/leisure craft, several camera mounting options also allows you to film your fight. If you want to fly FPV then you are able to mount your camera on the included board camera mounting plate. A top mounted accessory plate help to secure and protect your FPV video downlink and battery. Should you want to take some stabilized arial footage, the CarbonGear CarbonQuad 330/470 Gimbal Mount Plate will allow you to mount a ZenMuse H3-3D gimbal. Combine that with the Gimbal Plate Board Mount Kit and you can fly FPV and get great stabilized arial footage.

DJI Naza-M V2 Flight Controller

**Includes Flight Controller, PMU and GPS**















All-in-one Design

DJI adheres to continuous innovating and improving, with the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.

Independent PMU with amazing function extension

The Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)

Advanced & Improved Attitude Stabilization Algorithm

The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability even without the GPS module. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.

Nine Types of Multi-rotors Supported

Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
  • Quad I, Quad X
  • Hexa I, Hexa V, Hexa Y, Hexa IY
  • Octo X, Octo I, Octo V
(Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please pay attention to the vibration situation and try to do some vibration dampening)


Multiple Flight Control Modes/Intelligent Switching

It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.

GPS Module Available/Accurate Position Hold

The plug and play GPS module will greatly enhance the performance for Aerial Photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.

Enhanced Failsafe Mode

If your transmitter supports failsafe, then you can set failsafe through port-U. Naza controller has built-in auto level failsafe function, which means when the communication between MC and the transmitter is disconnected, the outputs of all command sticks from controller will go to center position. If the GPS module is used, you can also set RTH on failsafe. If your transmitter has only 4 channels, then MC will work in Atti. Mode by default without the failsafe function.

Two Levels of Low Voltage Protections

In order to prevent your multi-rotor from crashing or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection. You can choose not to use this, however we strongly recommend you to enable the protection. Both levels of protection have LED warning as default. The first level will blink the red light continuously; the second level will blink red light continuously and the multi-rotor will descend and land. In manual mode when low voltage protection is triggered the LED warning will be active only.

Motor Arm and Motor Dis-arm

There are four ways to start the motors, see the following picture:

When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors.

Motor Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and Immediate Mode. For more information, please refer to the user manual or DJI Wiki.

Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover.



PPM, S-BUS & Ordinary Receiver Supported

Minimum Four channel receiver supported, also PPM and Futaba S-Bus receiver supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel functions are set using channel X2, use only one servo cable to connect the PPM or S-Bus to X2, this makes installation quick and easy, not easy to make mistakes.

Independent LED Module

The Independent LED module makes the indication of the flight status and the system status to the ground much clearer. The pilot can get information more quickly and more conveniently, even at night, he/she can get real-time flight information feedback through the LED flashing frequency and colour. In addition, the module has a USB interface, which is used for parameter settings and firmware upgrade.

Built-in Gimbal Stabilization Function

The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters the first time.

Multi-rotor One-power Output Fail Protection

In most conditions, the whole multi-rotor will retain good attitude and rotate around the frame arm with no power output, due to imbalanced mechanical structure and external environment. Rotating is mainly caused by payload and external environment. Payload heavier, rotating speed is faster. On rotating, the hexa-rotor physical structure causes rudder out of control. This humanistic protection function from Naza-M V2, in Attitude or GPS Mode, makes attitude still under control even with any one power output failed and highly reduces crash risk.

Remote Gain Adjustment

The default parameter settings are OK for you to achieve a normal flight, and it also supports remote parameter adjustment by using a control slider on the TX during flight, in order to obtain better performance.

New Assistant Software & Firmware Online Update

The user interface of the assistant software has been comprehensively updated and brings you a new interaction experience, and instructions will automatically appear which is very convenient. In addition, on the left side of each menu section there is additional information. The logical design makes your parameter settings more simple and convenient. Like other DJI products the Naza-M V2 firmware can be upgraded free online.


Basic Performance Supported Multi-rotor Supported ESC output Recommended Transmitter Working Voltage Range
Quad-rotor I4, X4
Hex-rotor I6, X6, IY6, Y6
Octo-rotor I8,V8,X8
400Hz refresh frequency PCM or 2.4GHz with minimum 4 channels MC:4.8V~5.5V
VU Input: 7.4V ~ 26.0 V
(recommend 2S ~ 6S LiPo)
Output(V-SEN port red wire): [email protected]
(burst current:7.5A)
Power Consumption Operating Temperature Assistant Software System Requirement  
MAX: 3.15W([email protected])
Normal:1.638W([email protected])
-10C ~ 50C Windows XP sp3 / Windows 7 / Windows 8  
Flight Performance Hovering Accuracy
(GPS Mode)
Max Yaw Angular Velocity Max Tilt Angle Ascent / Descent
Vertical:0.8m
Horizontal:2.5m
200/s 35 6m/s,4.5m/s
Hardware Weight Dimensions Built-In Functions  
MC:27g
PMU:28g
GPS:27g
LED:13g
MC: 45.5mm x 32.5mm x 18.5mm
PMU: 39.5mm x 27.5mm x 10.0mm
GPS & Compass 46mm(diameter)x10mm
LED: 25mm x 25mm x 7.0mm
Multiple Autopilot Control Mode
Enhanced Fail-safe
Low Voltage Protection
S-Bus Receiver Support
PPM Receiver Support
Independent PMU Module
2-axle Gimbal Support

DJI 2212 920kv Naza Motors (4)



Specifics:
  • DJI 2212/920KV
  • Dimension : 28X24mm
  • Rating : 920kv
  • Battery : 3S,4S
  • Shaft : 8.0mm
  • Weight : 56gr (with Prop Adapter)
  • Standard Current : 15-25A
  • Max Current : 30A
  • Recommended prop : Li-Poly (11.1V) : 10x4.5 Li-Poly (14.7V) : 8X4.5
  • Gold connector is included

DJI Innovations E300 15A Electronic Speed Control (ESC)



DJI E300 15 Amp ESC.  Replacement ESC for DJI's E300 Tuned Propulsion System.  Will work with other multi-rotor setups requiring 15A ESC.

DJI 8" Propellers
(2-Left Rotation and 2 Right Rotation)


8"x4.5 Props for DJI Flamewheel, includes 2 pair of normal and reverse props (4 props total). We strive to find the best prop for the money and I think we found them. These props are well balanced right out of the bag.

Required for build:

Battery 3s 2500, 4s 2200
Minimum 6 channel radio system
 
Kit comes with:

  • 1 - Phoenix Flight Gear CarbonSpyder 330mm FPV Quad Frame Kit
  • 4 - Dji 2212 920kv motors
  • 4 - Dji 8x4.5 props
  • 1 - DJI NAZA V2M + GPS flight controller
  • 4 - DJI E300 ESCs
  • 1 - Phoenix Flight Gear 100amp Power Distribution Board


Hop-up sport build component recommendations:
RcTiger motors
Graupner 8x5 props
Sparky flight controller
30a Maytech with Simon K firmware ESC
4s 1300-4s 2200 battery

FPV rig build recommendations:

Dji 2212 920kv motors
Graupner 8x5 props
DJI V2 NAZA + GPS
18a Opto ESC
4s 2200mah battery
FatShark Predator V2 package (includes all required FPV components)



Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"