Tiny Whoov FPV Micro Hovercrafts

MICRO Multi Rotors

3D Printed Products

RotorX Atom RX122 V1/V2/V3

Custom Built Multi Rotors

Multi Rotor Kits (RTF/ARF)

Multi Rotor Flight Controllers

Multi Rotor Frames

Multi Rotor Landing Gear

Camera Mounts, Gimbals & Servos

FPV/OSD/Video Downlink

Multi Rotor Motors

Multi Rotor ESC / BEC

Multi Rotor Props

GPS / WayPoints etc...

Batteries / Accessories

Multi Rotor Spare Parts

Battery Chargers / Power Supplies

DJI Phantom / INSPIRE 1 Accessories

Power Distribution Boards/Harness/Voltage Regs

Build Fees / Labor Charges

Hardware, Accessories & Misc.

Helicopter Accessories & Upgrades

Flight Simulator / Trainer

Multi Rotor Orientation LED's

Top Plate Kits

Hardware/Standoffs/Aluminum/Nylon screws

Multi Rotor Cases

Phoenix Flight Gear Parts and Accessories

Transmitters/Receivers/Modules/Telemetry & Accessories

ARF Mini Quad BUILT FREE Combo Kits

Adhesives

Tools

You Tube/Facebook Links

Assembly Instructions

Carbon Fiber Specialties
AbuseMark
Acton
Aero Sim
Aeroxcraft
AlienWii
Altitude RC
APC
Avroto
Blade
BrotherHobby
Carbon Fiber Specialties
Carboncore
CarbonGear
Chaoli
Chargery Power
Crazepony
DALprop
DJI
Dragon Circuits
Dubro
DYS
Eachine
Estes
Extreme Fliers
FatShark
FeiYuTech
FlySight
Frsky
Furious FPV
FVT
FXT Technology
GAUI
Gemfan
Genix
Go Professional
Graupner
HDMI2AV
Hitech
HQ Props
Hubsan
Hyperion
ImmersionRC
iPower
ITELITE
KingKong
Lemon Rx
Lilliput
Makerfire
Maytech
MJX
MultiFlite
Multiprotocol
Multirotor UAV
NAZE
Orion RC
Oversky
PFG Phoenix Flight Gear
PhantoMount
PhotoHigher
Pololu
Pulse
Quanum/Scisky
Racerstar
Rakon
Rc Logger
RC-Drones
RotorX
RS90
RunCam
Ryze Robotics
Secraft
Spektrum
Sputnik
Sunrise Model
Superior Hobby
Tattu
Thunder Power
T-Motor
Trinity
Turnigy
Vortex
Vulcan UAV
Walkera
Wiha
X468
X-Cam
Zippy
ZMR250
ZOP
Home>Multi Rotor Kits (RTF/ARF)>BLADE
Phoenix Flight Gear Carbon Fiber 200QX Mini-H Frame

Phoenix Flight Gear Carbon Fiber 200QX Mini-H Frame

Item Id: PFG-CG200QX
Your Price:
$50.00
Availability:
Now Shipping In Stock
Free Shipping over$50
Choose Options
200QX Carbon Fiber Top Accessory Plate
Orientation LED's
Carbon Fiber 200QX Mini Board Camera Mount
Quantity
Email a friend Email a friend
Description
Phoenix Flight Gear Carbon Fiber 200QX Mini-H Frame

Ultra Light and Durable Frame Upgrade



**FRAME ONLY, Electronics/Stock 200QX sold separately**
**Board Camera Mount and Accessory Top Plate sold separately**



**FRAME ONLY, Electronics/Stock 200QX sold separately**
**Board Camera Mount and Accessory Top Plate sold separately**





**FRAME ONLY, Electronics/Stock 200QX sold separately**
**Board Camera Mount and Accessory Top Plate sold separately**


**FRAME ONLY, Electronics/Stock 200QX sold separately**
**Board Camera Mount and Accessory Top Plate sold separately**


Detailed Installation Diagram (below)






Description:
Take your 200QX and shave grams off the weight of your stock frame. This new 3k twill weave solid carbon fiber frame we designed here after the boss took his new 200QX out for itís third flight and busted the motor pod right off. After a few prototype frames we have made this solid frame to be lighter, faster, fly longer and remove the restrictive battery compartment. We kept the frame within the same footprint as the stock frame to utilize any cases that are available for the stock 200QX This will fit into any of those cases with little to no modification to the case foam.These mods allow you to take your 200QX to the next level.

Durability was a crucial component of the frame design. After experiencing tragic failure of the stock 200QX frame on a very early flight we first wanted to get more aggressive in our flights and the stock frame just didnít seem up to the task. The motors mount to the one piece frame with the stock acorn nut and a woven carbon fiber spacer to keep weight down and keep that clean carbon fiber look. Mounting points on the arms allow for three types of landing gear. The included standoff landing gear or RcLogger Xtreme EyeOne landing gear, both the 38mm and 79mm landing legs will work.

Lightening of the frame was easy, single piece construction with minimal hardware and material removed from the central frame for improved airflow on your 4-in-1 ESC board. Reducing the overall wind profile of the craft is another great benefit of this frame, providing faster forward flight less affected by crosswinds. Airflow improvements have greatly helped in our high stress acro flights of the 200QX and turn a stock mini quad into the high performance CarbonFiber 200QX Mini H.


Longer flights have also been made possible through the elimination of the battery compartment allowing for the installation of any 800-1500 2 cell batteries with a JST connector. Battery consumption is much lower with all of the bulky plastic frame gone, less motor power is required to perform arial maneuvers reducing current draw on the FETís. With the the stock canopy frame removed we found that the ESC board runs around 50 degrees cooler, even during high current draw sport flight.

For FPV or aerial photography buffs out there we have made a board cam mounting plate. Screw on the top mount accessory plate and mount your VTX up top or, use the platform off the back of the frame to mount your electronics. With the drastic weight reduction over the stock frame adding some lightweight FPV gear wonít overload your quad. If you want to film your flight many of the action cameras available will mount right under the nose and the slots in the central frame will allow for many mounting tie points. We mounted our Mobius under and were able to film prop free video.

For the transplanting process the 200QX is hands down the easiest conversion that we have come up with to date. The 200QX frame splits apart and all of the internal electronics are held and mounted with 8 #0 phillips screws and the motors have just a acorn nut holding them in place. No soldering, lengthening of motor wires or advanced skill is needed, the entire process takes 30-45 minuets to complete.



Specs:
200QX frame only: 19g
Included 40mm legs: 5.5g
FPV cam, plate, tab with hardware 5g
Accessory plate with hardware: 8g

Includes:
Phoenix Flight Gear Carbon Fiber 200QX Mini-H Frame
4 - M3x6 screws
4 - M3x40 nylon landing leg standoffs
4 - M1.4x4 self tapping screws
4 - Motor mount spacers
Adhesive Foam
Adhesive Velcro
Fish Line
Velcro strap

Requires:
2.0mm allen wrench
1.3mm allen wrench
#0 Phillips head screwdriver
4mm Nut driver

**We do not ship all items International so we have our checkout setup to not allow International orders.**

We do ship frames/accessories International.

Please send us a link to the exact items you would like to purchase and we will send a Paypal invoice.

We can ship up to 4 micro frames USPS Priority International for $24












Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"
Browse Similar Items