Tiny Whoov FPV Micro Hovercrafts

MICRO Multi Rotors

3D Printed Products

RotorX Atom RX122 V1/V2/V3

Custom Built Multi Rotors

Multi Rotor Kits (RTF/ARF)

Multi Rotor Flight Controllers

Multi Rotor Frames

Multi Rotor Landing Gear

Camera Mounts, Gimbals & Servos

FPV/OSD/Video Downlink

Multi Rotor Motors

Multi Rotor ESC / BEC

Multi Rotor Props

GPS / WayPoints etc...

Batteries / Accessories

Multi Rotor Spare Parts

Battery Chargers / Power Supplies

DJI Phantom / INSPIRE 1 Accessories

Power Distribution Boards/Harness/Voltage Regs

Build Fees / Labor Charges

Hardware, Accessories & Misc.

Helicopter Accessories & Upgrades

Flight Simulator / Trainer

Multi Rotor Orientation LED's

Top Plate Kits

Hardware/Standoffs/Aluminum/Nylon screws

Multi Rotor Cases

Phoenix Flight Gear Parts and Accessories

Transmitters/Receivers/Modules/Telemetry & Accessories

ARF Mini Quad BUILT FREE Combo Kits

Adhesives

Tools

You Tube/Facebook Links

Assembly Instructions

Carbon Fiber Specialties
AbuseMark
Acton
Aero Sim
Aeroxcraft
AlienWii
Altitude RC
APC
Avroto
Blade
BrotherHobby
Carbon Fiber Specialties
Carboncore
CarbonGear
Chaoli
Chargery Power
Crazepony
DALprop
DJI
Dragon Circuits
Dubro
DYS
Eachine
Estes
Extreme Fliers
FatShark
FeiYuTech
FlySight
Frsky
Furious FPV
FVT
FXT Technology
GAUI
Gemfan
Genix
Go Professional
Graupner
HDMI2AV
Hitech
HQ Props
Hubsan
Hyperion
ImmersionRC
iPower
ITELITE
KingKong
Lemon Rx
Lilliput
Makerfire
Maytech
MJX
MultiFlite
Multiprotocol
Multirotor UAV
NAZE
Orion RC
Oversky
PFG Phoenix Flight Gear
PhantoMount
PhotoHigher
Pololu
Pulse
Quanum/Scisky
Racerstar
Rakon
Rc Logger
RC-Drones
RotorX
RS90
RunCam
Ryze Robotics
Secraft
Spektrum
Sputnik
Sunrise Model
Superior Hobby
Tattu
Thunder Power
T-Motor
Trinity
Turnigy
Vortex
Vulcan UAV
Walkera
Wiha
X468
X-Cam
Zippy
ZMR250
ZOP
Home > Multi Rotor Kits (RTF/ARF) > BLADE
Phoenix Flight Gear Carbon Fiber 200QX Folding Mini-H ARF Kit
Phoenix Flight Gear Carbon Fiber 200QX Folding Mini-H ARF Kit

Phoenix Flight Gear Carbon Fiber 200QX Folding Mini-H ARF Kit

Item Id: PFG-CG200QXFARF
Your Price:
$344.00
Availability:
In Stock Now Shipping
Free Shipping over$50
Choose Options
200QX Carbon Fiber Top Accessory Plate
Transmitter + Labeling & Setup
Orientation LED's
Carbon Fiber 200QX Mini Board Camera Mount
Quantity
Email a friend Email a friend
Description
Phoenix Flight Gear Carbon Fiber 200QX

Folding Mini H ARF Kit



This package includes a Bind-n-Fly 200QX custom built on our Phoenix Flight Gear Frame.  Includes everything a stock 200QX BNF comes with. We transplant the electronics and test fly.

**Add a Spektrum Transmitter to your custom build.  Spektrum Radios work GREAT with the BLADE 200QX with tons of features! See above dropdown menu for list of different transmitters**


**With the purchase of the Optional Spektrum Transmitter,

WE WILL LABEL AND PROGRAM your new transmitter**

**High Performance Folding Frame for the 200QX**















Detailed Installation Diagram (below)





Description:

Take your 200QX and shave grams off the weight of your stock frame and keep the electronic cool. This new 3k twill weave solid carbon fiber frame we designed to fold into an even smaller form factor for storage and transport. After designing the Carbon Fiber 200QX Mini H Frame we turned it into a folder that is also lighter, faster, fly longer and removes the restrictive battery compartment of the stock frame. Even with reformatting to fold we were able to retain a frame design that will fit into the cases available for the stock 200QX with little to no modification to the case foam. These mods allow you to take your 200QX to the next level.

As always, durability is a crucial component of the frame design. After experiencing tragic failure of the stock 200QX frame on a very early flight we first wanted to get more aggressive in our flights and the stock frame just didn’t seem up to the task. The motors mount to the arms with the stock acorn nut and a woven carbon fiber spacer to keep weight down and keep that clean carbon fiber look. Mounting points on the arms allow for three types of landing gear. The included standoff landing gear or RcLogger Xtreme EyeOne landing gear, both the 38mm and 79mm landing legs will work.

Reducing weight over the stock monocoque style shell was easy, 1.5mm carbon fiber central frame and 2.0mm carbon fiber for stronger arms and material removed from the central frame both lighten the frame and improve airflow on your 4-in-1 ESC board. Reducing the overall wind profile of the craft is another great benefit of this folding frame, providing faster forward flight less affected by crosswinds. Airflow improvements have greatly helped in our high stress acro flights of the CarbonGear 200QX Frame and turn a stock mini quad into the high performance Folding Carbon Fiber 200QX.

Longer flights have also been made possible through lightening and the elimination of the battery compartment allowing for the installation of any 800-1500 2 cell battery with a JST connector. Battery consumption is much lower with all of the bulky plastic frame gone, less motor power is required to perform arial maneuvers reducing current draw on the FET’s. With the the stock canopy frame removed we found that the ESC board runs around 50 degrees cooler, even during high current draw sport flight.

For FPV or aerial photography buffs out there we have created the optional board cam mounting plate. (sold separately) Screw on the top mount accessory plate and mount your VTX up top or, use the platform off the back of the frame to mount your electronics. With the drastic weight reduction over the stock frame adding some lightweight FPV gear won’t overload your quad. If you want to film your flight many of the action cameras available will mount right under the nose and the slots in the central frame will allow for many mounting tie points. We mounted our Mobius under and were able to film prop free video.

The conversion process is simple and requires basic hobby skills with minimal tools. The 200QX frame splits apart and all of the internal electronics are held and mounted with 8 #0 phillips screws and the motors have just a acorn nut holding them in place. No soldering, lengthening of motor wires or advanced skill is needed, the entire process takes 45-60 minuets to complete.



See your world from a new vantage point

Elevating Quadcopter Performance

SAFE™ (Sensor Assisted Flight Envelope) technology is a revolutionary electronic flight envelope protection system. It also offers smoother flight capability that battles windy conditions for you and multiple modes so you can fly with the level of protection and assistance that suits any given moment of the flight.

Engineered with SAFE Technology

Camera Mode

In camera mode, advanced stability and small pitch and roll angle limits combine with smooth electronic self-leveling for stable image and video capture.

Integrated LED Lighting

High intensity internal LED lighting provides status indication as well as orientation. The lighting system is hidden under a translucent fuselage and provides optimal visibility during the day and night.

Powerful Brushless Motors

The 200 QX is powered by four authoritative brushless motors which provide intense power for aerobatics, precision flight and even heavy payloads. Thanks to this aggressive power, the 200 QX is capable of carrying addition weight and can be flown indoors and outdoors in medium winds.

Camera Functionality

The Blade 200 QX has been optimized for use with the E-flite® EFC-721 HD camera. When paired with a Spektrum transmitter this intuitive camera can accept commands to capture quality still images and HD video during flight.

Stability (Bailout)

White LED Status

The Stability (Bailout) Mode is similar to Stability Mode for upright flight. In this mode the throttle is offset to run only from 51% to 100%; this throttle curve helps prevent a pilot from accidentally flying into the ground when flipping out of inverted flight and back to an upright position.

3d Stagility™

Purple Status LED

3D Stagility Mode features a self-leveling characteristic that's active when the control sticks are released. Whether you're flying inverted or upright, the 200 QX will self-level so you can learn inverted flight with mild assistance. When flying in this mode, 0-50% throttle is reversed thrust and 51%-100 is positive thrust.

3D Agility

Yellow Status LED

3D Agility Mode was designed for experienced pilots, anyone who has mastered inverted flight in all orientations and advanced pilots looking for a full 3D flying experience with no self-leveling. When flying in this mode, 0-50% throttle is reversed thrust; 51%-100 is positive thrust.

E-flite EFC-721 Camera

Thanks to its integration of SAFE technology and its powerful brushless motors the 200 QX serves as an excellent camera platform for the E-flite EFC-721 camera. With minimal effort, you can pair this compact HD camera with the 200 QX and capture crisp images and HD video. Control functions allow you to take that perfect picture at just the right moment and to stop and start recording with the flick of a switch.

*The EFC-721 is not included with this version of the 200QX

New Firmware Update

The firmware update for the Blade 200 QX unlocks three additional flight modes so you can experience the aerobatic potential of the 200 QX. While the updated firmware software is free, the Blade 200 QX update cable (BLH7840) is required to install the software to a 200 QX. Additionally, pilots must install the appropriate propellers prior to flight in order to experience each flight mode to its full extent.

Download the Firmware Update
Inverted 200 QX

Stock Specs:

Battery:     800mAH, 800mAH
Completion Level:     Bind-N-Fly
Is Assembly Required:     No
Main Blade Material:     Plastic
Main Rotor Diameter:     4.45 in (113mm), 4.45 in (113mm)
Rotor Type:     Quad-Copter
Size/Scale:     200mm

Link to Blade 200QX User Manual:
http://www.horizonhobby.com/pdf/BLH7780-Manual_EN.pdf

Kit Specs:
ALL STOCK Blade 200QX COMPONENTS
Phoenix Flight Gear Carbon Fiber 200QX Folding Frame
4 - M3x6 screws
4 - M3x40 nylon landing leg standoffs
4 - M1.4x4 self tapping screws
4 - M2x10 screws
8 - M2x8 screws
12 - M2 Locknuts
16 - M2 Washers
8 - Nylon M2 washers
4 - Motor mount spacers
Adhesive Foam
Adhesive Velcro
Fish Line
Velcro strap

Required:
2.0mm allen wrench
1.3mm allen wrench
4mm nutdriver
#0 Phillips head screwdriver










Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"
Browse Similar Items