Description:
This is a new frame designed off our Carbon Fiber 200QX frame. Following the same design elements but is cut from 1/8” Impact-Resistant Polycarbonate. We love to fly at night after work like
so many guys out there so this new polycarbonate will allow the
installation of the LED into the frame illuminating the entire frame.
Maintaing orientation is much easier with the rim of this frame
illuminated. We kept the frame within the same footprint as the stock
frame to utilize the cases that are available for the stock 200QX. This
will fit into any of those cases with little to no modification to the
case foam. This mod will allow you to take your 200QX out at night or
day.
Durability is a crucial component of the frame design. Polycarbonate
offers great impact and crash resistance. The motors mount to this one
piece frame with a motor spacer and M7 jam nut to keep weight down and
keep a great clean look. Mounting points on the arms allow for three
types of landing gear. The included standoff landing gear or RcLogger
Xtreme EyeOne landing gear, both the 38mm and 79mm landing legs will
work.
Single piece construction with minimal hardware and material removed
from the central frame for improved airflow on your 4-in-1 ESC board.
Reducing the overall wind profile of the craft is another great benefit
of this frame, providing faster forward flight less affected by
crosswinds. Airflow improvements have greatly helped in our high stress
acro flights of the 200QX and turn a stock mini quad into the high
performance 200QX Mini H.
Longer flights have also been made possible through the elimination of
the battery compartment allowing for the installation of any 800-1500 2
cell batteries with a JST connector. Battery consumption is much lower
with all of the bulky stock frame gone, less motor power is required to
perform arial maneuvers reducing current draw on the FET’s. With the the
stock canopy frame removed we found that the ESC board runs around 50
degrees cooler, even during high current draw sport flight.
For FPV or aerial photography buffs out there we have made a board cam
mounting plate. Screw on the top mount accessory plate and mount your
VTX up top or, use the platform off the back of the frame to mount your
electronics. With the drastic weight reduction over the stock frame
adding some lightweight FPV gear won’t overload your quad. If you want
to film your flight many of the action cameras available will mount
right under the nose and the slots in the central frame will allow for
many mounting tie points. We mounted our Mobius under and were able to
film prop free video.
For the transplanting process the 200QX is hands down the easiest
conversion that we have come up with to date. The 200QX frame splits
apart and all of the internal electronics are held and mounted with 8 #0
phillips screws and the motors have just a acorn nut holding them in
place. The motors mount to this one piece frame with a motor spacer and
M7 jam nut to keep weight down and keep a great clean look. Mounting
points on the arms allow for three types of landing gear. The included
standoff landing gear or RcLogger Xtreme EyeOne landing gear, both the
38mm and 79mm landing legs will work. No soldering, lengthening of motor
wires or advanced skill is needed, the entire process takes apron.
30-45 minuets to complete.
Elevating Quadcopter Performance
SAFE™
(Sensor Assisted Flight Envelope) technology is a revolutionary
electronic flight envelope protection system. It also offers smoother
flight capability that battles windy conditions for you and multiple
modes so you can fly with the level of protection and assistance that
suits any given moment of the flight.
Engineered with SAFE™ Technology
Camera Mode
In
camera mode, advanced stability and small pitch and roll angle limits
combine with smooth electronic self-leveling for stable image and video
capture.
Integrated LED Lighting
High
intensity internal LED lighting provides status indication as well as
orientation. The lighting system is hidden under a translucent fuselage
and provides optimal visibility during the day and night.
Powerful Brushless Motors
The
200 QX is powered by four authoritative brushless motors which provide
intense power for aerobatics, precision flight and even heavy payloads.
Thanks to this aggressive power, the 200 QX is capable of carrying
addition weight and can be flown indoors and outdoors in medium winds.
Camera Functionality
The
Blade 200 QX has been optimized for use with the E-flite® EFC-721 HD
camera. When paired with a Spektrum transmitter this intuitive camera
can accept commands to capture quality still images and HD video during
flight.
Stability (Bailout)
White LED Status
The
Stability (Bailout) Mode is similar to Stability Mode for upright
flight. In this mode the throttle is offset to run only from 51% to
100%; this throttle curve helps prevent a pilot from accidentally flying
into the ground when flipping out of inverted flight and back to an
upright position.
3d Stagility™
Purple Status LED
3D
Stagility Mode features a self-leveling characteristic that's active
when the control sticks are released. Whether you're flying inverted or
upright, the 200 QX will self-level so you can learn inverted flight
with mild assistance. When flying in this mode, 0-50% throttle is
reversed thrust and 51%-100 is positive thrust.
3D Agility
Yellow Status LED
3D
Agility Mode was designed for experienced pilots, anyone who has
mastered inverted flight in all orientations and advanced pilots looking
for a full 3D flying experience with no self-leveling. When flying in
this mode, 0-50% throttle is reversed thrust; 51%-100 is positive
thrust.
Thanks
to its integration of SAFE technology and its powerful brushless motors
the 200 QX serves as an excellent camera platform for the E-flite
EFC-721 camera. With minimal effort, you can pair this compact HD camera
with the 200 QX and capture crisp images and HD video. Control
functions allow you to take that perfect picture at just the right
moment and to stop and start recording with the flick of a switch.
*The EFC-721 is not included with this version of the 200QX
New Firmware Update
The
firmware update for the Blade 200 QX unlocks three additional flight
modes so you can experience the aerobatic potential of the 200 QX. While
the updated firmware software is free, the Blade 200 QX update cable
(BLH7840) is required to install the software to a 200 QX. Additionally,
pilots must install the appropriate propellers prior to flight in order
to experience each flight mode to its full extent.
Download the Firmware Update Stock Specs:
| Battery:
|
800mAH, 800mAH
|
|
Completion Level:
|
Bind-N-Fly
|
|
Is Assembly Required:
|
No
|
|
Main Blade Material:
|
Plastic
|
|
Main Rotor Diameter:
|
4.45 in (113mm), 4.45 in (113mm)
|
|
Rotor Type:
|
Quad-Copter
|
|
Size/Scale:
|
200mm |
Link to Blade 200QX User Manual:http://www.horizonhobby.com/pdf/BLH7780-Manual_EN.pdf
Kit Specs:-
Phoenix Flight Gear 200QX Polycarbonate frame only: 29g
-
Included 40mm legs: 5.5g
-
FPV cam, plate, tab with hardware: (Prototype in work)
-
Accessory plate with hardware: (Prototype in work)
Includes:- ALL STOCK Blade 200QX COMPONENTS
- Phoenix Flight Gear Polycarbonate 200QX Mini-H Frame
- Phoenix Flight Gear Polycarbonate 1.5mm 200QX Top Accessory Plate
-
4 - M3x8 screws
-
4 - M3x40 nylon landing leg standoffs
-
4 - M1.4x6 self tapping screws
-
4 - Motor mount spacers
-
4 - M7 Jam nuts
-
Adhesive Foam
-
Adhesive Velcro
-
Fish Line
-
Velcro strap
Requires:-
2.0mm allen wrench
-
1.3mm allen wrench
-
#0 Phillips head screwdriver
-
4mm Nut driver
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"
