PhantoMounts Belt Drive Sony Action Cam
Gimbal for the Phantom
(Assembled)
Product Description
The PhantoMount Action Cam
gimbal features a 2:1 belt drive reduction and double ball bearings on
the roll axis for smoother travel and video quality. A direct servo
drive on the tilt axis reduces the forward weight, and simplifies the
overall operation of the gimbal. Purchase the carbon fiber F450/550
Flamewheel Legs and raise your F550 3.25" off the ground allowing 1.5"
of clearance between the bottom of this gimbal and ground.
Utilizing the Gimbal
Stabilization built into the DJI NAZA-M or Wookong-M flight controller
you can directly power and control the gimbal. No additional expensive
stabilization controller is needed.
The PhantoMounts Action Cam
gimbal will arrive fully assembled and tested. Installation onto your
DJI Phantom is easy too. Connect to your flight controller, set up and
tune the gimbal in the DJI Assistant Software then film where you fly!
We recommend that you power
your PhantoMount Action Cam gimbal servos through a 6v BEC harness.
This will provide smoother reaction and cleaner videos.
The PhantoMount Action Cam
gimbal is intended for aerial photography with the camera out of its
case. For FPV flight, removal of the ports cover is required to access
the HDMI output.
This gimbal is also top
plate convertible to fit multiple airframes with the PhantoMounts Top
Plate Conversion Kits.
**SONY ACTION CAM AND DJI PHANTOM NOT INCLUDED**
Convert your PhantoMounts Gimbal to fit other airframes here:
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"
