Blade Nano QX/NQX Motors Chaoli
CL-0615-14-P Hyper Speed Motors
Includes: (2) CW Motors (2) CCW Motors
**Hyper Speed Motors Are For Not Good For Hovering As The kv is Too High**
They are designed for tearing up the sky!!!
We will have the slower motors in soon that are faster than stock but will not oscilate while hovering
I
You
are comfortably flying your Nano QX want more power - this is the motor
for you. The CL-0615-14 "pack a punch" - be careful with the throttle!
Warning: this motor does not like hovering.
If you enjoy hovering, you should look at the CL-0615-11 instead.
Performance data: operating voltage: 1.5-3.7V
max. thrust: 15g (direct drive)
1.0A load current at 3.7V (direct drive)
Dimensions: can diameter: 6mm
can length: 15mm
shaft diameter: 0.8mm
shaft length: 5mm
weight: 1.8g
To maximise performance and life span, dont run them in reverse!
Please
note: wire color coding is reversed from the stock motors. (Blade has
decided to code their motors differently to everyone else in the
industry..)Installation: (Below)The CL-0615-14 is a drop-in replacement for the Nano QX.
Please note the wire color coding is different from the stock motors.
Motor rotation and correct polarity is indicated by the wire color:
clockwise: red +, blue -
counter clockwise: white +, black -The front right and the rear left on a Nano QX need clockwise motors. (red/blue)
The front left and the rear right need counter clockwise motors. (white black)
Props stay in the same place as before!
**Micro Motor Tips**1-Drill props with #62 drill bit so they press on all the way.
2-Rest motor bottom end cap on corner of a table or something to keep it from popping off when you push the props on.
3-Add a little epoxy to the edges of the bottom end caps to keep them from popping off in a crash or when pushing props on.
4-Let motors cool a little in between battery packs.
5-Replace nicked or damaged props as damaged props will cause the motor to run hotter and will affect efficiency.
6-Make sure micro is balanced as an unbalanced micro will not fly as well and motors will run hotter and will affect efficiency.
7-Buy spares because if you crash a lot you will need them.
FPV Cam Direct Soldered to the FC:
FX797T 5.8Ghz 25mW 40CH AV Transmitter VTX
w/Raceband 600TVL Camera All-In-One
Description:
Brand: FX
Item Name: FX797T 5.8G 25mW Transmitter With 600TVL Camera
Output power: 25mW
Input power: 2.5–5V
Current Consumption: 230mA
Camera resolution: 600TVL
Min illumination: 1 lux
Field of view: 120° viewing angle
Antenna dimensions: 20mm X 25mm diameter
Antenna: 3 lobe right hand circular polarized
Video output: NTSC
Frequency: 5.8GHz 5 bands 40 channels, with Raceband: 5658-5917MHz
Bands: see below channel table.
Push button operation, long press for band, short press for channel
2 row LED indicators, 5 LED for band, 8 LED for channel
Size: 17x20mm
Weight: 4.5g
|
Frequency Table |
|
Frequency Band A |
5865 |
5845 |
5825 |
5805 |
5785 |
5765 |
5745 |
5725 |
|
Frequency Band B |
5733 |
5752 |
5711 |
5790 |
5809 |
5828 |
5847 |
5866 |
|
Frequency Band E |
5705 |
5685 |
5665 |
5645 |
5885 |
5905 |
5925 |
5945 |
|
Frequency Band F |
5740 |
5760 |
5780 |
5800 |
5820 |
5840 |
5860 |
5880 |
|
Frequency Band R |
5658 |
5695 |
5732 |
5769 |
5806 |
5843 |
5880 |
5917 |
Features:
1. Micro Size and Light weight
2. Easy installation for racing drone
3. Five bands 40 channels with Raceband
4. Button Control Instead Of Switch
1 x FX797T 5.8G 25mW Transmitter With 600TVL Camera and Antenna
1 x manual
Battery Charger:1S USB Li-Po Charger, 500mAh High Current UMX
Blade Glimpse/Nano QX2 FPV (EFLC1013)
**Brand New Take-off Parts Removed From New Blade Nano QX2 FPV**
This replacement E-flite High Current UMX 1S USB LiPo Charger comes
standard with the Nano QX2 FPV quadcopter and
conveniently charges the
QX2 1S LiPo battery from a 5V USB outlet/port. Standard features include
LED status indicator.
Specifications:
DC Input: 5.0V/500mA
DC Output: 4.2V/500mA
Spare set of Blade Props:Blade Inductrix Prop Set (4) White BLH8705
**Brand New Takeoff Parts From New Blade Inductrix Quadcopter Drones**
Upgraded 200mAh Battery For Longer Flights:
Eachine 3.7V 200mah 30C 1S Lipo Upgrade Battery
for Blade Inductrix Tiny Whoop RC Quadcopter
Description:
Brand Name: Eachine
Item Name: Lipo Battery
Capacity:
3.7V 200mah 30C
Size: 50.10*11*6mm
Weight: 6g
Wire length: 32.45mm
Flight time:
About 8 minutes
Charging time: About 60 minutes
Usage: for
Blade InductrixTiny Whoop RC Quadcopter
Package Included:
1 x 3.7V 200mah Battery
Phoenix Flight Gear Blade Inductrix Micro All-In-One
FPV Camera Mount without Antenna Protector (Tiny Whoop Style)
**Camera NOT INCLUDED**
Hold
your camera with the new Phoenix Flight Gear Blade Inductrix Micro
All-In-One FPV Camera Mount w/Ant Protector(Tiny Whoop Style)
Please choose your color from the dropdown box.
Weight = .08 grams
