| Description |
NAZE 32 ACRO 6DF REV 5 Flight Controller Board
with Pins and Breakout Cable
**In Stock Now Shipping**
PLEASE NOTE: Includes Straight and Angled Pins and breakout cable as pictured. Can be configured with BaseFlight or CleanFlight software.At the heart of
the Naze32 is a 32bit ST micro work horse of a processor, with untapped
memory and cpu power and a host of equally impressive sensors. The Naze
is also matched up with some of the nicest GUI programs and features to
get the most out of your configuration.This "ACRO" version does not
include an on-board magnetometer and barometric pressure sensor for
altitude hold and heading hold. See our Naze32 "FULL" version if you
want those extra features. Features:
- Flexible motor outputs, support various airframe types: Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X)
- Up to 8 ch RC input - supports standard receivers (PWM), PPM Sum receiver (FrSky, etc), or Spektrum satellite receivers.
- Built in FrSky telemetry inverter (shared w/main port)
- Battery voltage monitoring
- STM32F103CB 32-bit ARM Cortex M3 processor (72MHz, 3.3V)
- Invensense MPU6050 MEMS accelerometer + gyro
- Built-in Micro-USB for programming/firmware update
- 36x36mm size, ~5 gram weight w/o headers
- Made in JAPAN
- 16V input capable voltage regulators
This Naze32 comes with all needed header pins (straight and right angle options), NOT soldered to the board. RC input breakout cable is included to allow connecting to 4-channel+ receiver.
Specs:- 36x36 mm (30.5mm Mounting)
- 5.3 grams (no headers, 7.3 grams with)
- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6050)
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line
Included:- Full Naze32 rev5
- 2x5 pin header
- 2x3 pin header (right angle)
- 2x3 pin header (straight)
- 3x6 pin header (right angle)
- 3x6 pin header (straight)
- 1x RC breakout cable
The
Naze32 Acro can be loaded with firmware for MultiWii, BaseFlight, or
CleanFlight and be configured with the corresponding program. By
default the boards are loaded with BaseFlight firmware and can be
configured with the BaseFlight app for Google Chrome.
Download the user manual HERE
Download BaseFlight Configurator for Chrome HERE
Download CleanFlight Configurator HERE
Download MultiWii Configurator HERE
|
|
