| Description |
DJI iOSD MARK II
"Collect Real Time Flight Data"
Features:
- Highly integrated and practical with a compact size.
- Support the DJI professional autopilot system.
- Real-time accurate flight data & video signal superposition.
- Support double video source input, switchable during flight.
- Remote video link channels switchable in real-time.
- Upgradable via free online upgrades.
- Built-in BEC module, support 3S - 6S LiPo.
- Can work normally between -20 degrees C - 60 degrees C without adapter.
The DJI iOSD MARK
II adopts a highly integrated design which makes it very exquisite and
practical. Many of the real-time aircraft flight information, such as
the status and coordinates of the aircraft, are superposed on the video
which will surely bring you a more involved and safety flight
experience.
The DJI iOSD MARK
II should be used in conjunction with the DJI autopilot system, such as
WooKong-M and Ace One series, which will surely bring you a perfect
flight performance. Depend on the DJI’s accumulation of mature and
reliable information integration technology, the iOSD MARK II can grab
the most accurate first-hand flight data information in the shortest
possible time.
The DJI iOSD MARK
II can collect real-time video and flight data, which will help you to
obtain the aircraft status information during flight. It can display
power voltage, flight velocity, height, distance from the home point,
horizontal attitude and GPS satellite number, etc.
The DJI iOSD MARK
II supports two video input sources: PAL or NTSC mode, which can be
selected remotely by an R/C transmitter switch. By doing this the pilot
can achieve double video alternation during flight and can also set one
source for the aerial camera and the other one for FPV, which will
ensure the nose direction of the aircraft is under control and a safety
return while shooting wonderful footage.
The R/C TX switch
can also change the wireless video transmitter channel remotely when
user uses the wireless video transmitter designated by DJI. This design
has brilliantly avoided the inconvenience of manual switch on the
ground. When there is video signal interference during flight the pilot
can switch the channels immediately to finish the flight mission.
The DJI iOSD MARK
II has a USB interface for future online upgrade in order to get a
better user experience and free functional escalation.
DJI iOSD MARK II has a
built-in BEC module which supports 3S – 6S LiPo battery. It is on the
one hand for the power supply of the camera, on the other hand for the
power supply of the main controller to improve the power supply
reliability of the main controller.
 |
| The iOSD MARK
II now provides Assistant Software and supports online upgrade which
makes it easy for you to acquire new function. The current iOSD on the
market can be upgraded to the new iOSD MARK II to have the flight log
function. |
 |
| The DJI
iOSD MARK II can record the flight log, which will help you to record
the input and output information of every channel, GPS signal, power
voltage, home distance and height, etc. (The current iOSD on the market
will have flight log function after firmware upgrade.) |
Performance Parameter
| Video Input Model |
PAL/NTSC |
| Video Output Model |
PAL/NTSC |
Physical Parameter
| Temperature |
-20 degrees C - 60 degrees C |
| Size |
52mm X 41mm X 11mm |
| Weight |
56g |
Hardware Supported
Software Supported
| Build-in Function |
1.iOSD Information Transmission
2.Video Transmission, Two Video Signal Channels Input & Switch
3.Channel Switch Supported for the Wireless Video Transmitter Module specified by DJI
4.DJI Z15 Supported |
|
|
