DJI Spreading Wings S900 Hexacopter with WKM and
Zenmuse BMPCC and Lightbridge COMBO
Spreading Wings S900

The DJI Spreading Wings S900 is designed for professional
aerial photographers and cinematographers. Its lightweight, compact
design makes it easy to take anywhere and create amazing aerials on the
go. Equipped with our most advanced motors and electronic speed
controllers, a sturdy carbon fiber frame, and a brand new power
distribution system, the S900 gives you the power, strength and
stability you need to create amazing footage.
DJI Spreading Wings S900 Features

Professional Quality
Lightweight, Strong and Stable
The S900’s arms and landing gear are made of sturdy carbon fiber,
greatly reducing weight while increasing stability and
strength. This enables a long flight time without sacrificing
performance.
Weighing just 3.3kg, the S900 has a maximum takeoff
weight of 8.2kg. This means you can easily carry most cameras and
gimbals. Used with a 6S 12000mAh battery, it can fly for up to 18
minutes.*
*Maximum flight time is tested on a breezeless day with a payload of 6.8kg, hovering at a height of 2 meters.
Wide Range of Shooting Angles
Retractable landing gear and a special low gimbal mounting bracket
gives you an extremely wide range of possible shooting angles and
camera motions.


Reduced Vibrations, Clearer Footage
The S900’s gimbal bracket is separated from the main frame by
specifically designed dampers. This significantly reduces high-frequency
vibrations and makes your shots
clearer and sharper.
Removable Upper Center Board
The upper center board can be removed, allowing easy access to
install your flight controller and IMU, and giving you a convenient way
to setup the power distribution system. Even installation of your main
controller, iOSD, Lightbridge, or any other accessories is faster and
easier than ever before.

This new center board structure is perfectly compatible with the DJI WKM and A2 flight controllers.

New Power Distribution System
A redesigned, rebuilt power distribution system improves safety and
reliability. Gold-plated metal bearings with a unique screw design
secure the power cords, ensuring cables will not come loose during
flight and allowing easy setup.

Sparkproof Plug
Prevent short circuits and easily plug in your power supply with the AS150 sparkproof plug.
Compatible with Zenmuse Gimbals
DJI’s Zenmuse camera gimbals are known for their stability, providing smooth footage capture in even the most difficult of
conditions. The S900 fully supports the Zenmuse Z15, GH3, GH4, and BMPCC gimbals.
Innovative Arm Design
Each arm is designed with an 8° inversion and a 3° inclination,
making the aircraft more stable when rolling and pitching, yet more
flexible when rotating.
Greater Power
A 40A electronic speed controller (ESC), our fastest available, is
built in to each arm. Combined with its 4114 pro motors, high
performance 1552 folding propellers, and V-type mixer design, the S900
has a maximum thrust of 2.5Kg.
Our latest motor adopts a single wire
stator design, offering improved heat dissipation, better performance,
and a tidier, more reliable system.

Specifications:
Frame
Diagonal Wheelbase 900mm
Frame Arm Length 358mm
Frame Arm Weight (with Motor, ESC, Propeller ): 316g
Center Frame Diameter 272mm
Center Frame Weight (with Landing Gear Mounting Base, Servos): 1185g
Landing Gear Size 460mm(Length)×450mm(Width)×360mm(Height)
Motor
Stator Size 41×14mm
kV 400rpm/V
Max Power 500W
Weight (with Cooling Fan) 158g
ESC
Working Current 40A
Working Voltage 6S LiPo
Signal Frequency 30Hz ~ 450Hz
Drive PWM Frequency 8KHz
Weight (with Radiators) 35g
Foldable Propeller (1552/1552R)
Material High strength performance engineered plastics
Size 15×5.2inch
Weight 13g
Flight Parameters
Takeoff Weight 4.7Kg ~ 8.2Kg
Total Weight 3.3Kg
Power Battery LiPo (6S?10000mAh~15000mAh?15C(Min))
Max Power Consumption 3000W
Hovering Power Consumption 1000W (@6.8Kg Takeoff Weight)
Hovering Time 18min (@12000mAh& 6.8Kg Takeoff Weight)
Working Environment Temperature -10 oC ~ +40 oC
DJI LightBridge HD Digital
Video Downlink
