Description |
DJI Naza-M V2 Flight Controller
Includes Flight Controller, PMU and LED (NO GPS)
All-in-one Design
DJI adheres to
continuous innovating and improving, with the new firmware, new attitude
stabilization algorithm and optimized hardware structure, the Naza-M V2
provides better flight performance. The innovative All-in-one design
simplifies installation and saves space and weight. It contains inner
damping, controllers, 3-axis gyroscope, 3-axis accelerometer and
barometer in its light and small Main Controller. It can measure flying
altitude, attitude and therefore can be used for autopilot/automatic
control.
Independent PMU with amazing function extension
The Naza PMU V2
has enhanced BEC functionality and provides extendable CAN BUS ports,
which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is
also included for optional Bluetooth LED module to allow parameter
adjustment via a mobile APP (future firmware upgrade required for this
functionality)
Advanced & Improved Attitude Stabilization Algorithm
The latest fourth
generation attitude stabilization algorithm not only inherits the
outstanding flight stability of DJI products, but also provides
excellent maneuverability even without the GPS module. It is more
flexible and stable, and gives the hobbyists a wonderful flight
experience. New features have been included such GPS course automatic
compensation, GPS & Compass sensor calibration, new take-off mode
and so on.
Nine Types of Multi-rotors Supported
Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
- Quad I, Quad X
- Hexa I, Hexa V, Hexa Y, Hexa IY
- Octo X, Octo I, Octo V
(Naza-M
V2 does not support the aircraft which has large vibration, so when you
choose to use hexa-rotor or octo-rotor, please pay attention to the
vibration situation and try to do some vibration dampening)
Multiple Flight Control Modes/Intelligent Switching
It offers three
types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode,
Manual Mode. The pilot can switch between the three modes to achieve
different flight characteristics. It also can adjust automatically
within the flight environment and intelligently switch between GPS Atti.
Mode and Atti. Mode to make sure the flight is safe and secure. In the
software at the position of the manual mode you can choose manual,
attitude or failsafe; it supports one key failsafe trigger.
Enhanced Failsafe Mode
If your transmitter
supports failsafe, then you can set failsafe through port-U. Naza
controller has built-in auto level failsafe function, which means when
the communication between MC and the transmitter is disconnected, the
outputs of all command sticks from controller will go to center
position. If the GPS module is used, you can also set RTH on failsafe.
If your transmitter has only 4 channels, then MC will work in Atti. Mode
by default without the failsafe function.
Two Levels of Low Voltage Protections
In order to prevent
your multi-rotor from crashing or other harmful consequences caused by
low battery voltage, we have designed two levels of low voltage
protection. You can choose not to use this, however we strongly
recommend you to enable the protection. Both levels of protection have
LED warning as default. The first level will blink the red light
continuously; the second level will blink red light continuously and the
multi-rotor will descend and land. In manual mode when low voltage
protection is triggered the LED warning will be active only.
Motor Arm and Motor Dis-arm
There are four ways to start the motors, see the following picture:
When
you want to start the multi-rotor, you need to perform any of the ways
of CSC. During the flight, if the motors stop, you can immediately
execute the CSC and the motors will start. This enhances the safety of
the multi-rotor; no uncontrolled starting of the motors. Motor
Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and
Immediate Mode. For more information, please refer to the user manual
or DJI Wiki. Note: It has a brand new, smoother take-off
algorithm, which is more stable and provides a brand-new experience and
supports double spring TX; every time you let go of the throttle stick
it will hover.
PPM, S-BUS & Ordinary Receiver Supported
Minimum Four channel
receiver supported, also PPM and Futaba S-Bus receiver supported. PPM
& S-Bus receivers (the general use of the first 8 channels of S-Bus
receiver) to optimize the channel connection, the A, E, T, R, U
five-channel functions are set using channel X2, use only one servo
cable to connect the PPM or S-Bus to X2, this makes installation quick
and easy, not easy to make mistakes.
Independent LED Module
The Independent LED
module makes the indication of the flight status and the system status
to the ground much clearer. The pilot can get information more quickly
and more conveniently, even at night, he/she can get real-time flight
information feedback through the LED flashing frequency and colour. In
addition, the module has a USB interface, which is used for parameter
settings and firmware upgrade.
Built-in Gimbal Stabilization Function
The gimbal
stabilization module is compatible with almost all 2-axis gimbal
systems. The system will adjust the gimbal and camera according to the
attitude of the aircraft after setting the parameters the first time.
Multi-rotor One-power Output Fail Protection
In most conditions,
the whole multi-rotor will retain good attitude and rotate around the
frame arm with no power output, due to imbalanced mechanical structure
and external environment. Rotating is mainly caused by payload and
external environment. Payload heavier, rotating speed is faster. On
rotating, the hexa-rotor physical structure causes rudder out of
control. This humanistic protection function from Naza-M V2, in Attitude
or GPS Mode, makes attitude still under control even with any one power
output failed and highly reduces crash risk.
Remote Gain Adjustment
The default parameter
settings are OK for you to achieve a normal flight, and it also
supports remote parameter adjustment by using a control slider on the TX
during flight, in order to obtain better performance.
New Assistant Software & Firmware Online Update
The user interface of
the assistant software has been comprehensively updated and brings you a
new interaction experience, and instructions will automatically appear
which is very convenient. In addition, on the left side of each menu
section there is additional information. The logical design makes your
parameter settings more simple and convenient. Like other DJI products
the Naza-M V2 firmware can be upgraded free online.
Basic Performance |
Supported Multi-rotor |
Supported ESC output |
Recommended Transmitter |
Working Voltage Range |
Quad-rotor I4, X4 Hex-rotor I6, X6, IY6, Y6 Octo-rotor I8,V8,X8 |
400Hz refresh frequency |
PCM or 2.4GHz with minimum 4 channels |
MC:4.8V~5.5V
VU Input: 7.4V ~ 26.0 V (recommend 2S ~ 6S LiPo) Output(V-SEN port red wire): [email protected] (burst current:7.5A) |
Power Consumption |
Operating Temperature |
Assistant Software System Requirement |
|
MAX: 3.15W([email protected]) Normal:1.638W([email protected]) |
-10°C ~ 50°C |
Windows XP sp3 / Windows 7 / Windows 8 |
|
Flight Performance |
Hovering Accuracy
(GPS Mode) |
Max Yaw Angular Velocity |
Max Tilt Angle |
Ascent / Descent |
Vertical:±0.8m Horizontal:±2.5m |
200°/s |
35° |
6m/s,4.5m/s |
Hardware |
Weight |
Dimensions |
Built-In Functions |
|
MC:27g PMU:28g GPS:27g LED:13g |
MC: 45.5mm x 32.5mm x 18.5mm PMU: 39.5mm x 27.5mm x 10.0mm GPS & Compass 46mm(diameter)x10mm LED: 25mm x 25mm x 7.0mm |
Multiple Autopilot Control Mode Enhanced Fail-safe Low Voltage Protection S-Bus Receiver Support PPM Receiver Support Independent PMU Module 2-axle Gimbal Support |
|
|