Tiny Whoov FPV Micro Hovercrafts

MICRO Multi Rotors

3D Printed Products

RotorX Atom RX122 V1/V2/V3

Custom Built Multi Rotors

Multi Rotor Kits (RTF/ARF)

Multi Rotor Flight Controllers

Multi Rotor Frames

Multi Rotor Landing Gear

Camera Mounts, Gimbals & Servos

FPV/OSD/Video Downlink

Multi Rotor Motors

Multi Rotor ESC / BEC

Multi Rotor Props

GPS / WayPoints etc...

Batteries / Accessories

Multi Rotor Spare Parts

Battery Chargers / Power Supplies

DJI Phantom / INSPIRE 1 Accessories

Power Distribution Boards/Harness/Voltage Regs

Build Fees / Labor Charges

Hardware, Accessories & Misc.

Helicopter Accessories & Upgrades

Flight Simulator / Trainer

Multi Rotor Orientation LED's

Top Plate Kits

Hardware/Standoffs/Aluminum/Nylon screws

Multi Rotor Cases

Phoenix Flight Gear Parts and Accessories

Transmitters/Receivers/Modules/Telemetry & Accessories

ARF Mini Quad BUILT FREE Combo Kits

Adhesives

Tools

You Tube/Facebook Links

Assembly Instructions

Carbon Fiber Specialties
AbuseMark
Acton
Aero Sim
Aeroxcraft
AlienWii
Altitude RC
APC
Avroto
Blade
BrotherHobby
Carbon Fiber Specialties
Carboncore
CarbonGear
Chaoli
Chargery Power
Crazepony
DALprop
DJI
Dragon Circuits
Dubro
DYS
Eachine
Estes
Extreme Fliers
FatShark
FeiYuTech
FlySight
Frsky
Furious FPV
FVT
FXT Technology
GAUI
Gemfan
Genix
Go Professional
Graupner
HDMI2AV
Hitech
HQ Props
Hubsan
Hyperion
ImmersionRC
iPower
ITELITE
KingKong
Lemon Rx
Lilliput
Makerfire
Maytech
MJX
MultiFlite
Multiprotocol
Multirotor UAV
NAZE
Orion RC
Oversky
PFG Phoenix Flight Gear
PhantoMount
PhotoHigher
Pololu
Pulse
Quanum/Scisky
Racerstar
Rakon
Rc Logger
RC-Drones
RotorX
RS90
RunCam
Ryze Robotics
Secraft
Spektrum
Sputnik
Sunrise Model
Superior Hobby
Tattu
Thunder Power
T-Motor
Trinity
Turnigy
Vortex
Vulcan UAV
Walkera
Wiha
X468
X-Cam
Zippy
ZMR250
ZOP
Home>Multi Rotor Flight Controllers
DJI A2 Multi-Rotor Stabilization/Flight Controller And DJI iOSD MKII Combo

DJI A2 Multi-Rotor Stabilization/Flight Controller And DJI iOSD MKII Combo

Item Id: FC-A2IOSD-FCK
Your Price:
$1,399.00
Availability:
In Stock Now Shipping
Free Shipping over$50
Quantity
Email a friend Email a friend
Description
DJI A2 Multi-rotor Stabilization Controller System

and

DJI iOSD MARK II Combo Kit


A2 IMPOSSIBLY PRECISE A new standard in flight control!


A2 Multi-rotor Stabilization Controller

DJI A2 multi-rotor stabilization controller is a complete flight control system for various multi-rotor platforms, for commercial and industrial AP applications. It opens an unprecedented era of precise positioning and perfect flight control in harsh environments for flight control systems.

Its high performance antenna, low noise anti-interference front-end RF design, accurate position and speed calculating, represent comprehensive technological breakthroughs. These combined features make the positioning performance of the GPS Pro near perfection; With higher accuracy performance, larger measuring range, and a unique damping design and calibration algorithm, the IMU is able to provide stable output even in high vibration and large movement environments. The built-in receiver system directly supports the popular transmitters, and it also supports a variety of external receivers. Combined with abundant output interfaces and flexible configuration, it makes the flight controller competent for complex control and airborne equipment operation; the new dual CAN-Bus design greatly improves the data throughput and stability of the system.

Based on the technology and design philosophy of DJIís Ace series of high-performance controllers, the A2 offers you a brand new flight experience. The A2 adopts a full metal case design and utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renowned flight algorithm in flight control and UAV field.

A2 Multi-rotor Stabilization Controller

GPS-Compass Pro Module

The GPS receiver of the A2 GPS-Compass Pro Module is equipped with a new high gain and high performance right-handed circular polarized (RHCP) antenna, the low noise anti-interference front-end RF design and the optimized localization algorithm, which provides the GPS Pro with stronger anti-interference performance, a stronger ability to capture satellite signals and a more accurate position hold calculating ability. All these features have enhanced its position locking capability.

GPS-Compass Pro Module

High Sensitive Built-in Damper IMU Module

The interior sensor of the A2 IMU has been upgraded comprehensively, and with higher accuracy performance, larger measuring range, and a unique damping design and calibration algorithm, the IMU is able to provide stable output even with high vibration and a large movement environment. The advanced sensor temperature compensation algorithm and industrialized accurate calibration algorithm gives the IMU excellent performance. With the DJI innovative damping structure and material, it is unnecessary to install a framework or cushioning, you can simply stick it on the aircraft. Small size and weight allow easy installation in a tight space, it simplifies the installation process, for various aircraft sizes.

High Sensitive Built-in Damper IMU Module

Built-in 2.4Ghz DR16 Receiver

The A2 has a built-in 2.4Ghz Radio technology DESST receiver system (the newest DJI Enhanced Spread Spectrum Technology), which supports the Futaba FASST series of transmitters. It can support 16 channels. Futaba transmitter users can use the system without any external receiver, which has greatly simplified the complexity of the system and improved the security of the remote control system.

Built-in 2.4Ghz DR16 Receiver

Support for external receivers

A2 system has two reserved JR and SPEKTRUM satellite receiver ports, which support JR and SPEKTRUM satellite receivers. It currently supports SPEKTRUM DX6I, DX8 transmitters, other JR or SPEKTRUM series will be supported in the future.

The system supports external receivers including the Futaba S-Bus receiver, PPM receiver.

Support for external receivers

Dual CAN-Bus system

The A2 system has a dual CAN-Bus design, which means that the system data throughput will be doubled and the extendibility is improved. At the same time, the important data and the non-critical data are assigned respectively on different CAN-Bus ports, which greatly improves the system stability.

Dual CAN-Bus system

More output interfaces

The A2 is equipped with a minimum of twelve output channels, users can easily use it to control an Oct-rotor, and the other four channels can be used as a general output interface, for example, to control the DJI retractable landing gear on S800 EVO, to control Gimbal or camera switch, etc.

More output interfaces

Precise Position Hold and Wind Resistance

With the new generation GPS Pro/CompassModule and the hardware upgraded IMU module, the A2 has an optimized inertial navigation algorithm, which ensures the system can get a more reliable and accurate position and attitude estimate. The aircraft which is equipped with A2 will have very good performance in position hold even in a semi-closed environment, such as between buildings, it also has excellent hovering performance. At the same time, with the optimized algorithm of inertial navigation and the algorithm of wind resistance, the Wind Resistance performance of A2 is also improved, and the multi-rotor can have position and altitude locked accurately even in windy conditions.

Precise Position Hold and Wind Resistance

High Accuracy and intuitive Flight experience

With the A2, flying a multi-rotor will be as easy as driving a car. The pilot is released from the stress of controlling the multi-rotor and able to pay more attention to other tasks, instead of focusing on flying.

High Accuracy and intuitive Flight experience

Supports Online Firmware Updates

Different from other DJI flight controllers, the A2 offers a comprehensive online firmware upgrade ability: the Controller, IMU and GPS Pro, Receiver and Bluetooth LED indicator can be upgraded online through the assistant software separately. Lets you experience the latest technology comprehensively and quickly.

Supports Online Firmware Updates

9 Types of Multi-rotor and a Customized Motor Mixer

The A2 supports 9 types of traditional motor mixer:
Quad I, Quad X
Hex I,Hex V, Hex Y, Hex IY
Oct X, Oct I,Oct V
Itís a UAS thatís targeted at commercial and industrial multi-rotor platforms with simple configuration, easy installation and stable performance. It also supports customized motor mixing, which greatly meets the demands of particular users.

9 Types of Multi-rotor and a Customized Motor Mixer

More flexible input channel configuration

A2 flight control system supports a more flexible input channel configuration function; the transmitter channel can be mapped flexibly to meet the needs of various users.

More flexible input channel configuration

Multiple flight control modes/ Intelligent Switching

It offers three types of control modes: GPS Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. The Flight controller can also adjust automatically within the changing flight environment and intelligently switch between GPS Mode and Atti. Mode to make sure the flight is safe. In manual mode position the operator can choose between manual and attitude. It also supports an RTH Switch from the Transmitter.

Multiple flight control modes/ Intelligent Switching

Power Management Unit

The power management unit (PMU) is designed for the A2 to solve the high power consumption. It supplies power for the A2 system, for voltage detection and alarming. It contains two power outputs for the entire A2 system and receiver separately, a battery voltage monitor, and two CAN-Bus interfaces. In order to prevent your multi-rotor from crashing or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection with selectable LED indications, Go Home and Landing functionality.

Power Management Unit

Enhanced Fail-Safe and Auto Go Home/Landing

When signal is lost, the system will trigger failsafe, you can choose either hovering or Auto Go Home/Landing. In addition, the A2 now has a new function of RTH switch from transmitter. There is no need to turn into failsafe.

Enhanced Fail-Safe and Auto Go Home/Landing

Multi-rotor One-motor Fail Protection

This function means that when the aircraft is in attitude or GPS attitude mode, and one of the motors stops, the aircraft will retain good attitude and rotate around the frame arm with the stopped motor. In this condition, the aircraft is still under control and returns home safely and highly reducing the risk of a crash.

Multi-rotor One-motor Fail Protection

Intelligent Landing Gear Function

Once you enabled the Intelligent Landing Gear function in the assistant software, the landing gear is default at the Lower position when the aircraft is on the ground; and the system will lower the landing gear in emergency, motor failure or auto landing, to protect the aircraft and gimbal; you can control to lower or retract the landing gear by a switch when the aircraft altitude is over 5m from the ground.

Intelligent Landing Gear Function

Intelligent Orientation Control (IOC)

Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:

In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures (Mode 2):

In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor. See the following figures (Mode 2):

Intelligent Orientation Control (IOC)

Point of Interest (POI)

A2 has a POI function: Point of Interest. When the GPS signal is good, users can record the current position of the aircraft as a point of interest by a preset switch on the remote controller. The aircraft can achieve a circling flight around the point of interest with the nose pointing at the POI in an area of 5 meters to 500 meters radius, when the roll command is given. This function is easy to set and simple to operate, it is suitable for all-round shooting of a fixed scenic spot.

Point of Interest (POI)

Bluetooth Module and New Assistant Software for Smartphones

The A2 provides assistant software for iPhone4s, iPhone5, iPad3, iPad4, iPad Mini, iPod5. You can do parameter adjustments at any time on your mobile devices, using only the standard LED indicator with a built-in Bluetooth module that makes it easier and convenient. It uses low power Bluetooth to minimize the power consumption of your mobile devices. It is easy to use and will automatically save your last connection data. The password mechanism ensures your link is safe. Parameters can be automatically synchronized to the Cloud Server and can be restored immediately when you change your mobile devices.

Bluetooth Module and New Assistant Software for Smartphones

User-friendly Assistant Software

The user interface of the assistant software has been comprehensively updated and brings you a new interaction experience. The logical design makes your channel configuration and parameter settings more simple and convenient.

User-friendly Assistant Software

50 Waypoints Ground Station Control System(Available Soon)

The A2 is equipped with 50 Waypoints Ground Station and it also supports iOS mobile devices (Bluetooth 4.0 or above). With the reliable communication and simple operation, it is easy for you to control your aircraft. It also contains such ground control functions as real-time flight monitoring and flight status notification, joystick control with touch, one key takeoff, preset flight route and click & go.

50 Waypoints Ground Station Control System(Available Soon)

Other useful functions

In addition to the above functionalities the A2 also has other useful functions:

Built-in 2-axis Gimbal Stabilization: The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters for the first time. It stabilizes the camera and improves the quality of aerial photography.
Home Point Indicating: the system will indicate the home point location with LED blinking to avoid the wrong home point recording, and ensures that the RTH function operates as expected.
Tail-in RTH: it allows the users to easily view the LED indicator and have a better control over the aircraft.
Compass Error Alarming: when the compass encounters interference sources, the LED will blink to warn you.

Other useful functions

Accessories supported

The A2 is perfectly matched to the iOSD and the ZENMUSE series gimbals, which provides the most comprehensive performance for the professional users.

Accessories supported

Features:
  • Highly integrated and practical with a compact size.
  • Support the DJI professional autopilot system.
  • Real-time accurate flight data & video signal superposition.
  • Support double video source input, switchable during flight.
  • Remote video link channels switchable in real-time.
  • Upgradable via free online upgrades.
  • Built-in BEC module, support 3S - 6S LiPo.
  • Can work normally between -20 degrees C - 60 degrees C without adapter.



The DJI iOSD MARK II adopts a highly integrated design which makes it very exquisite and practical. Many of the real-time aircraft flight information, such as the status and coordinates of the aircraft, are superposed on the video which will surely bring you a more involved and safety flight experience.



The DJI iOSD MARK II should be used in conjunction with the DJI autopilot system, such as WooKong-M and Ace One series, which will surely bring you a perfect flight performance. Depend on the DJI‚€ôs accumulation of mature and reliable information integration technology, the iOSD MARK II can grab the most accurate first-hand flight data information in the shortest possible time.



The DJI iOSD MARK II can collect real-time video and flight data, which will help you to obtain the aircraft status information during flight. It can display power voltage, flight velocity, height, distance from the home point, horizontal attitude and GPS satellite number, etc.



The DJI iOSD MARK II supports two video input sources: PAL or NTSC mode, which can be selected remotely by an R/C transmitter switch. By doing this the pilot can achieve double video alternation during flight and can also set one source for the aerial camera and the other one for FPV, which will ensure the nose direction of the aircraft is under control and a safety return while shooting wonderful footage.



The R/C TX switch can also change the wireless video transmitter channel remotely when user uses the wireless video transmitter designated by DJI. This design has brilliantly avoided the inconvenience of manual switch on the ground. When there is video signal interference during flight the pilot can switch the channels immediately to finish the flight mission.



The DJI iOSD MARK II has a USB interface for future online upgrade in order to get a better user experience and free functional escalation.



DJI iOSD MARK II has a built-in BEC module which supports 3S ‚€ď 6S LiPo battery. It is on the one hand for the power supply of the camera, on the other hand for the power supply of the main controller to improve the power supply reliability of the main controller.

The iOSD MARK II now provides Assistant Software and supports online upgrade which makes it easy for you to acquire new function. The current iOSD on the market can be upgraded to the new iOSD MARK II to have the flight log function.

The DJI iOSD MARK II can record the flight log, which will help you to record the input and output information of every channel, GPS signal, power voltage, home distance and height, etc. (The current iOSD on the market will have flight log function after firmware upgrade.)

 

Performance Parameter

Video Input Model PAL/NTSC
Video Output Model PAL/NTSC
Physical Parameter
Temperature -20 degrees C - 60 degrees C
Size 52mm X 41mm X 11mm
Weight 56g
Hardware Supported
Voltage 3S - 6S
Current(Typical Value) [email protected]
[email protected]
Rated Power 1.25W
Controller Supported WKM
Software Supported
Build-in Function 1.iOSD Information Transmission
2.Video Transmission, Two Video Signal Channels Input & Switch
3.Channel Switch Supported for the Wireless Video Transmitter Module specified by DJI
4.DJI Z15 Supported