Kit also includes the following:
**Frame Sample shown with Standoffs**
**Frame Sample shown with Standoffs**
**Frame Sample shown with Standoffs**
Furious FPV PIKO BLX F3 Micro
Flight Controller w/Built-in PDB
PIKO BLX Micro Flight Controller - Change the Way You FPV.
Designed nothing short of revolutionary, the PIKO BLX Micro Flight
Controller changes everything - the true ultimate in the insanity fueled
micro FPV racing scene.
Ultra light, astonishingly small and packed with massive levels of
performance capability, the PIKO BLX is the one and only flight
controller that is ready & waiting to devastate the micro FPV
competition. Unlike any other system available today, the PIKO BLX
provides an all in one solution that brings forth the ultimate in
simplified sophistication, utilizing industry leading technology that
has never been seen in a system this compact.
Cluttered & complex wiring? Never again. With an industry 1st
gold plated PDB that is integrated within,the PIKO BLX provides the
ultimate in soldering ease with the highest grade of connectivity,
allowing direct soldering points for motors, VTx, Receiver and FPV
Camera. Simplicity has met its match, and we have yet to get started.
Utilizing the very latest F3 chip processor with built in CleanFlight
& BetaFlight firmware, the PIKO BLX utilizes industry leading
components with an included LC filter for the very best in signal
reception. Add the 2A 5V BEC with a built in Sbus inverter, and the PIKO
BLX stands alone amongst all the rest with a potent blend of race ready
madness.
Specified for micro FPV racing, the ultra small footprint of the PIKO
BLX is the perfect fusion of nano racing mania, providing a flight
controller experience second to none. This adhesion of performance,
capability & simplicity is the apex of nano FPV flight, providing
the end user with an FPV experience that brings everything to the table
in a zero compromise design.
For the pinnacle in simplicity, performance and cutting edge
capability, the PIKO BLX is the ultimate solution when it comes to the
micro FPV world. Get yours today, and change the way you FPV.
Features & Capabilities:
- The FIRST and ONLY 20X20mm platform micro flight controller with F3 chip
- The FIRST and ONLY micro flight controller with PDB built-in
- Heavy Duty 2A BEC @ 5V Output Built-in
- LC filter Built-in
- Built In Buzzer
- Gold Plated Pads for the Very Best Connectivity
- Firmware Perfection via CleanFlight & BetaFlight
-Sbus Ready w/ Built In Inverter
- Frysky Telemetry, Ready & Waiting
- Full USB Support
- Mounting Simplicity via 3mm Screws
- Ultra Compact Design for Ease of Installation
Videos:
All the targets are updated:
Raceflight: https://github.com/NightHawk32/raceflight/tree/PikoBLX_target
Cleanflight: https://github.com/NightHawk32/cleanflight/tree/PikoBLX_target_cf
Betaflight: https://github.com/NightHawk32/cleanflight/tree/PikoBLX_target_bf
BLX download section:
http://www.rcgroups.com/forums/showthread.php?t=2664875&page=9
https://github.com/NightHawk32/cleanflight/releases/tag/2.8.1-RC1
Oversky Rc DP03 3.5g Brushless Outrunner Motor
1S Version 7800KV 4-Pack
**Includes 4 Motors**
KV:7800
Idle current:0.18A/3.5V
Max current:2.95A
Shaft:1.5mm
Test result on 75mm propeller:Full throttle 45g/2.95A/3.7V
Half throttle 21g/1.2A/3.7V
Below half throttle 13g/0.65A/3.7V
As it is a very small motor, propeller saver is not recommended,
because the propeller saver will be too heavy compare with such a small
motor, you can use a plastic tube on the shaft and push the propeller
onto the shaft. Diameter of the motor is 14mm Shaft is 1.5mm Screw hole
spacing is 8.5mm, the screw is M1.4*3
Hubsan Style 3-Blade Micro Props for
the DP03 Brushless Motors (8 Props Total)
Props will need to be drilled out to 1.5mm or you can add drilling service from the drop down box
DYS XM10A Mini ESC w/BLheli firmware for
High KV Motor for Mini Multirotors
DYS
XM10A Mini ESC is specially designed for the micro motor with high KV
value. Perfectly match with DYS BE1104 KV4000 brushless motors and DYS
3020 Props.
Item Name: DYS XM10A Mini ESC
Input voltage: 1-3s Lipo
BEC: NO
Size (L*W*H): 23*12*4.5 (mm)
Weight: 7.2g
Model: mini 10A ESC with BLheli bootloader and BLheli 14.0
Signal frequency: 20-500Hz/ Oneshot125 Ultra high speed
Firmware:BLHeli
Feature:
- XM
series esc is an upgraded version from SN series, the basic frequency
up to 50MHz and processing capacity is faster to support high KV motor
properly by using the advanced processor.
- Specially for Multi-copter, fast throttle respond;
- Suitable for throttle, which can compatible well with motor;
- Throttle
signal is twisted pair cable, reduce the crosstalk while the signal
transfer by the copper wire and flight more stable;
- Use new process ultra-low resistance MOSFET with miniaturization, and all flashes are N MOS with high withstanding current;
- Minaturization design, XM10A/20A with high performance capacitor fliter on the board,
- weight reduce to 2g, also already thicken the PCB copper specially and low heat for small aircraft.
- Support
high frequency maximum up to 500Hz throttle signal, compatible with all
flight controls; Support ultra-high frequency Oneshot125 and high PWM
frequency up to 3000Hz, flight response will be more sensitive and
rapid, throttle liner will be better and shooting will be more smooth.
It is the first choice for multicopter and racing.
- Throttle
lever travel and other settings are available to be set by USB linker;
Support two-way mode and 3D mode for racing frame.
Specs:The RS90 is a 90mm
brushless fpv quad designed to be the ultimate indoor/proximity flyer.
Full propeller protection and a tiny form factor (4” x 6” flying size)
turn any location into an fpv playground without having to worry about
leaving prop marks everywhere. Despite a slightly heavier flying weight
compared to the typical quadcopter in this size class, brushless power
produces around 60g(@8.0V) thrust for a total thrust to weight ratio of
3.5!
-full prop guards mean you’ll almost never break props, saving money and time from balancing/drilling new props
-pusher props with essentially zero obstruction downstream for higher
efficiency and a much smaller chance of props flying off as they lose
grip on the motor shaft
-narrow
as possible motor to motor width (dimension orthogonal to the quads
forward direction of travel) to fly through the tightest gaps
-motors are completely surrounded by the frame, making it impossible for them to take a direct hit
-plastic (currently nylon) is soft and flexible making it less likely to damage surroundings, which is more important indoors
-no
electronics permanently attached to outer frame so rebuilds won’t
require any soldering, just a screwdriver and about 5 minutes
-frame rear weight bias to balance out the relatively large camera platform in front and potential hd camera
-motors mounts pushed outside of the frame to allow the use of lower
profile 12mm standoffs (originally used 18mm which requires a f/f and
m/f standoff) while still maintaining decent ground clearance
-integrated battery mount which provides support in the horizontal plane, preventing battery vibrations in flight
-slightly undersized motor screw holes for a sort of integrated nyloc. I
found that screws would vibrate loose with correctly sized holes
Lemon Rx DSM2 Compatible Satellite Receiver
*Compatable With The Our New AlienWii Brushed Flight Controller*
**In Stock now shipping**
Specification
|
Type: |
DSM2 Compatible Satellite Full Range Receiver |
|
Modulation: |
DSM2 Compatible |
|
Band: |
2.4 GHz |
|
Dimension: |
1.7(L) x 1.5(W) x 1(H) mm |
|
Weight: |
2.5 gram |
|
Voltage Range: |
3.3V from Receiver |
User Manual Download:Click to download Lemon Rx User Manual.pdf
Need a Custom RS90 Case (Links below):
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"
