Castle Creations BEC Switching Regulator
Our Battery
Eliminator Circuit is a little device that eliminates the need for a
receiver and servo battery pack. It draws higher voltage from the motor
batteries and drops it to a voltage level that is suitable for your
receiver and servos. This is required in applications which draw high
power for multiple servos or use more than 3S motor packs, as most ESCs
with linear BECs are not designed for these applications.
CC BEC is better because it is smaller, cheaper, and far more powerful.
| Technical Specifications: |
| Current Output: |
Peak: 10 amps
Continuous:
<12 volts input = 7 amps*
24
volts input = 5 amps**Ratings are determined with a 5mph airflow on the
BEC. Servo connectors are not rated for current in excess of 5 amps.
Users are encouraged to replace the connectors if more than 5 amp
currents are anticipated. |
| Output Voltage: |
Output 5.1 volts out of the package, user may set output voltage from 4.8 to 9 using the Castle Link (sold separately). |
| Input Voltage: |
5v to 25.2v (2S to 6S LiPo) |
Length:
Width:
Height: |
1.2" (30mm)
0.6" (15mm)
0.4" (10mm) |
| Weight: |
0.4 oz (11 grams) |
