CL-0820-17 "Anodized Dark Edition"
Coreless motor set, 8.5x20mm (speed: insane), direct drive
**Comes with 4 Motors 2CW, 2CCW**
****In Stock Now Shipping**
Compatible to:- Hubsan 107C, 107D
- all other micro quads with 8.5mm motor holders
Performance Data:
- Speed: 17.000K
-
Operating voltage: 1.5-3.7V
- Max. static thrust: 40g (direct drive, Hubsan X4 propeller)
- 3.2A max. load current at 3.7V (Hubsan X4 propeller)
- Factory lifetime rating: 5-6 hours
Dimensions:
- can diameter: 8.5mm
- can length: 20mm
- shaft diameter: 1mm
- shaft length: 5mm
-
weight: 4.9g
- housing: black anodised
All motor packs contain equal amounts of clockwise and counter
clockwise motors. To maximize performance and life span, don't run them
in reverse!
Motor rotation and correct polarity is indicated by the wire color:
clockwise: red +, blue -
counter clockwise: white +, black -
The new benchmark in the Micro Copter Universe!
Note: these motors do not include pinions!! For Alias Plug'n'Play motors.
This direct drive dark edition 0820-17 motor features shorter 8cm wires, and Micro-JST-1.25 plugs
**Micro Motor Tips**1-Drill props with #62 drill bit so they press on all the way.
2-Rest motor bottom end cap on corner of a table or something to keep it from popping off when you push the props on.
3-Add a little epoxy to the edges of the bottom end caps to keep them from popping off in a crash or when pushing props on.
4-Let motors cool a little in between battery packs.
5-Replace nicked or damaged props as damaged props will cause the motor to run hotter and will affect efficiency.
6-Make sure micro is balanced as an unbalanced micro will not fly as well and motors will run hotter and will affect efficiency.
7-Buy spares because if you crash a lot you will need them.
