CL-0720-14 Hyper Speed Coreless Motors 7x20mm
If you want to turn your 7mm quad into a cruise missile, this motor is the ticket!
They are designed for tearing up the sky!!!
This direct drive 0720-14 motor has Micro-JST-1.25 plugs installed to match the Nano QX FC and the AlienWii FC
Compatible with:
- Hobbyking Pocket Quad v1/v1.1 (plug polarity correct)
- Hubsan X4 107L (no motor connectors on the board, needs soldering)
- WLToys v242/v252 (no motor connectors on the board, needs soldering)
- Walkera Ladybird (has connectors, but plugs need revers polarity)
Specifications:
- operating voltage: 1.5-3.7V
- max. thrust: 26g (Hubsan X4 propeller)
- 1.8A load current at 3.7V (Hubsan X4 propeller)
Dimensions:
- can diameter: 7mm
- can length: 20mm
- shaft diameter: 1mm
- shaft length: 5mm
- weight: 3.4g
4 motors:
You get 4 motors (2 CW and 2 CCW)
All motor packs contain equal amounts of clockwise and counter
clockwise motors. To maximize performance and life span, don't run them
in reverse!
Motor rotation and correct polarity is indicated by the wire color:
clockwise: red +, blue -
counter clockwise: white +, black
**Micro Motor Tips**1-Drill props with #62 drill bit so they press on all the way.
2-Rest motor bottom end cap on corner of a table or something to keep it from popping off when you push the props on.
3-Add a little epoxy to the edges of the bottom end caps to keep them from popping off in a crash or when pushing props on.
4-Let motors cool a little in between battery packs.
5-Replace nicked or damaged props as damaged props will cause the motor to run hotter and will affect efficiency.
6-Make sure micro is balanced as an unbalanced micro will not fly as well and motors will run hotter and will affect efficiency.
7-Buy spares because if you crash a lot you will need them.
