Nano QX 6x15mm Coreless Motor Set CL-0615-11
(Speed: MEDIUM) includes 4 Motors




High precision motors for the Blade Nano QX.
Motors come with plugs and correct wire length (7cm) for the Nano QX.
Now with 5mm shaft length!
The CL-0615-11 has a lower top speed than its insane sibling, the CL-0615-14.
This
makes for a very gently throttle curve, very smooth flight
characteristics, while still providing enough thrust to get out of
trouble and up to speed quickly (faster than the nQX stock motors).
Performance data:
- speed: 11.000Kv
-
operating voltage: 1.5-3.7V
- 0.8A load current at 3.7V (direct drive)
Dimensions:
- can diameter: 6mm
- can length: 15mm
- shaft diameter: 0.8mm
- shaft length: 5mm
-
weight: 1.8g
All motor packs contain equal amounts
of clockwise and counter clockwise motors. To maximise performance and
life span, dont run them in reverse!
Motor rotation and correct polarity is indicated by the wire color:
Clockwise: red +, blue -
Counter clockwise: white +, black -
Please note: wire color coding is reversed from the stock motors.
(Blade has decided to code their motors differently to everyone else in
the industry)
**Micro Motor Tips**
1-Drill props with #62 drill bit so they press on all the way.
2-Rest motor bottom end cap on corner of a table or something to keep it from popping off when you push the props on.
3-Add a little epoxy to the edges of the bottom end caps to keep them from popping off in a crash or when pushing props on.
4-Let motors cool a little in between battery packs.
5-Replace nicked or damaged props as damaged props will cause the motor to run hotter and will affect efficiency.
6-Make sure micro is balanced as an unbalanced micro will not fly as well and motors will run hotter and will affect efficiency.
7-Buy spares because if you crash a lot you will need them.