AlienWii Classic Narrow 32U4 Flight Controller For

Brushed Motors (Newest Version)

**Out of Stock**

The AlienWii Classic Narrow Brushed FC is a High Performance Flight Controller that can be used to pilot Quadcopters using 7mm-8.5mm brushed motors. It features an Atmel Atmega 32u4 processor, MPU6050 Gyro/Accelerometer, built in 6.3A ESCs, and a built in Bind plug for easy transmitter binding.

The AlienWii “Classic Narrow” Brushed Flight Controller runs on Open Source MultiWii Firmware. < (Version MultiWii_2_4.zip)- The Firmware that started it all!

AlienWii Classic Narrow Brushed FC Pictures

AlienWii Classic Narrow Brushed FC Specifications:

• Atmel Atmega 32u4 micro controller
• MPU6050 accelerometer/gyro sensor unit
• 4x 6.3A brushed ESCs (Mosfets), integrated
• Integrated USB port
• * Serial connection for external DSM2/DSMX sat receiver (e.g. Spektrum SAT, OrangeRx R100 or Lemon RX)
• Hardware bind plug for easy binding
• Motor connections are at the corners for easy orientation with reduced wiring
• Dimensions: 31×26.7mm
• Direct operation from an single cell 3.7v Lipo battery

Most Spektrum Compatible DSM2 satellites work out of the box. DSMX sat will work with DSM2 protocol with default settings.

AlienWii Brushed-r2.4 Manual – A work in progress!

Brief History: The Classic Alienwii Flight Controller (AKA – Grandpa AlienWii) was originally created for myself a couple of years ago. During that time there were no plug and play Flight Controllers that would run MultiWii with brushed motors. I also created the integrated “hardware bind feature” to make Satellite RX binding, easy.

For me this board was a dream come true – it allowed me to dial in the flight characteristics of my brushed machines and make any brushed combo fly exactly how I wanted them to…

After sharing the Original Classic AlienWii with a few friends, others soon took interest. Initially many boards were hand built and given away. Due to popular demand, it was later decided to offer them for sale at Micro Motor Warehouse, and AlienWii was born. The Narrow Classic is the latest revision of the Original Classic.

Troubleshooting – AlienWii Classic

If the AlienWii Classic board does not stop flashing after 30+ flashes, it may have lost ACC calibration, and will need to be re calibrated.

VERY IMPORTANT: You must use MultiWiiConf GUI from the MultiWii 2.4 package or greater. Using MultiWiiConf 2.2 or earlier WILL corrupt your EEPROM! Using MultiWii WinGUI or any other program can also corrupt the EEPROM.

MultiWii Firmware V2.4

NOTE: The following process also assumes Java (a requirement for MultiWIiConf) is installed on your computer Download Java HERE. If you don’t have Jave installed, you might encounter an error:

Launching MultiWiiConf GUI and recalibrating:

1) Disconnect the battery
2) Ensure the AlienWii Classic Brushed FC is level and remains still
3) Plug the FC via USB into your computer
4) Run MultiwiiConf (version 2.4 or higher) – Use only the 32 bit version for both 32 and 64 bit PC
5) Press Reconnect or Connect
6) Ensure that ACC Roll and Pitch are near zero

a.) If Pitch and Roll are not close to zero
1) Press CALIB_ACC and wait until Pitch and Roll are close to zero
2) Press Write
3) Press STOP
4) Press CLOSE COMM to exit.