4-in-1 Control Unit Rx/ESCs/Gyro
Blade Nano QX FPV Flight
Controller w/JST Battery Connector
**Now you can build your own PFG brushed micro quadcopter w/Blade Nano QX FPV FC without soldering**
take a stock Blade Nano QX FPV flight controller and remove the small
stock battery connector and solder a JST battery connector w/20awg
wire direct to the FC.
We leave the stock Spektrum FPV cam plug on the FC.
**This is the ONLY way you can run 8.5mm motors on a Blade Nano QX FPV flight controller** We recommend our 750mAh lipo for this setup: CLICK HERE